Test Data AC7-03: Difference between revisions
Jump to navigation
Jump to search
Line 9: | Line 9: | ||
==Overview of Tests== | ==Overview of Tests== | ||
An experimental validation was performed for two operation points, the partial load (<math> Q=2.5~l/min </math>) and the nominal load (<math> Q=4.5~l/min </math>) at a rotational speed of <math> n=7,900~r/min </math>. | An experimental validation was performed for two operation points, the partial load (<math> Q=2.5~l/min </math>) and the nominal load (<math> Q=4.5~l/min </math>) at a rotational speed of <math> n=7,900~r/min </math>. The numerical VAD model was explained in section >>Flow Domain Geometry<<. This was originally created exclusively for numerical investigations. In order to enable an adequate validation of the simulated VAD flow, the following requirements were placed on the experimental model during conceptual design: | ||
==Description of Experiment== | ==Description of Experiment== |
Revision as of 11:07, 10 June 2021
Turbulent Blood Flow in a Ventricular Assist Device
Application Challenge AC7-03 © copyright ERCOFTAC 2021
Test Data
Overview of Tests
An experimental validation was performed for two operation points, the partial load () and the nominal load () at a rotational speed of . The numerical VAD model was explained in section >>Flow Domain Geometry<<. This was originally created exclusively for numerical investigations. In order to enable an adequate validation of the simulated VAD flow, the following requirements were placed on the experimental model during conceptual design:
Description of Experiment
Boundary Data
Measurement Errors
Measured Data
References
Contributed by: B. Torner — University of Rostock, Germany
© copyright ERCOFTAC 2021