Test Data AC2-09: Difference between revisions
Line 36: | Line 36: | ||
below 5% for the mean velocities and within 10% for fluctuating | below 5% for the mean velocities and within 10% for fluctuating | ||
components. | components. | ||
The scalar measurement errors are estimated and analyzed | The scalar measurement errors are estimated and analyzed | ||
in<ref name='refdesc2'>'''Barlow R.S., Frank J.H.''', Proc. Comb. Inst., 27:1087,1998</ref>. | |||
relative uncertainty (not including statistical noise or potential | The relative uncertainty (not including statistical noise or potential | ||
effects of spatial averaging) is estimated to be within 2% for the | effects of spatial averaging) is estimated to be within 2% for the | ||
Raman measurements, 5% for OH, 5% for CO, and 10% for NO. | Raman measurements, 5% for OH, 5% for CO, and 10% for NO. |
Revision as of 09:52, 29 April 2011
SANDIA Flame D
Application Challenge AC2-09 © copyright ERCOFTAC 2024
Overview of Tests
The velocity measurements were performed with two-component fiber-optic laser Doppler anemometer (Dantec). All the details of the flow field measuring techniques applied in Sandia Flame D experiment are explained in[1]. Measured scalars for Sandia D Flame include temperature, mixture fraction, N2, O2, H2O, H2, CH4, CO, CO2, OH and NO. Experimental methods and measurement uncertainties are outlined in[1] Spontaneous Raman scattering of the beams from two Nd:YAG lasers (532 nm) was used to measure concentrations of the major species. The Rayleigh scattering signal was converted to temperature using a species-weighted scattering cross section, based on the Raman measurements. Linear laser-induced fluorescence (LIF) was used to measure OH and NO, and the fluorescence signals were corrected on a shot-to-shot basis for variations in Boltzmann fraction and collisional quenching rate. The concentration of CO was measured by Raman scattering and by two-photon laser-induced fluorescence (TPLIF).
TEST CASE EXP1
Description of Experiment
Boundary Data
Measurement Errors
The flow field measurement statistical errors are estimated in [1] as below 5% for the mean velocities and within 10% for fluctuating components. The scalar measurement errors are estimated and analyzed in[2]. The relative uncertainty (not including statistical noise or potential effects of spatial averaging) is estimated to be within 2% for the Raman measurements, 5% for OH, 5% for CO, and 10% for NO.
Measured Data
References
Barlow R.S., Frank J.H., Proc. Comb. Inst., 27:1087,1998
TEST CASE EXP2
(as per EXP 1)
Contributed by: Andrzej Boguslawski — Technical University of Częstochowa
© copyright ERCOFTAC 2024