Test Data AC2-09: Difference between revisions
Line 8: | Line 8: | ||
'''Application Challenge AC2-09''' © copyright ERCOFTAC {{CURRENTYEAR}} | '''Application Challenge AC2-09''' © copyright ERCOFTAC {{CURRENTYEAR}} | ||
=Overview of Tests= | =Overview of Tests= | ||
< | The velocity measurements were performed with two-component fiber-optic | ||
laser Doppler anemometer (Dantec). All the details of the flow field | |||
measuring techniques applied in Sandia Flame D experiment are explained | |||
in [1]. Measured scalars for Sandia D Flame include temperature, mixture | |||
fraction, N<sub>2</sub>, O<sub>2</sub>, H<sub>2</sub>O, H<sub>2</sub>, | |||
CH<sub>4</sub>, CO, CO<sub>2</sub>, OH and NO. Experimental methods | |||
and measurement uncertainties are outlined in [1]. Spontaneous Raman | |||
scattering of the beams from two Nd:YAG lasers (532 nm) was used to | |||
measure concentrations of the major species. The Rayleigh scattering | |||
signal was converted to temperature using a species-weighted scattering | |||
cross section, based on the Raman measurements. Linear laser-induced | |||
fluorescence (LIF) was used to measure OH and NO, and the fluorescence | |||
signals were corrected on a shot-to-shot basis for variations in | |||
Boltzmann fraction and collisional quenching rate. The concentration of | |||
CO was measured by Raman scattering and by two-photon laser-induced | |||
fluorescence (TPLIF). | |||
==TEST CASE EXP1== | ==TEST CASE EXP1== | ||
===Description of Experiment=== | ===Description of Experiment=== |
Revision as of 09:37, 29 April 2011
SANDIA Flame D
Application Challenge AC2-09 © copyright ERCOFTAC 2024
Overview of Tests
The velocity measurements were performed with two-component fiber-optic laser Doppler anemometer (Dantec). All the details of the flow field measuring techniques applied in Sandia Flame D experiment are explained in [1]. Measured scalars for Sandia D Flame include temperature, mixture fraction, N2, O2, H2O, H2, CH4, CO, CO2, OH and NO. Experimental methods and measurement uncertainties are outlined in [1]. Spontaneous Raman scattering of the beams from two Nd:YAG lasers (532 nm) was used to measure concentrations of the major species. The Rayleigh scattering signal was converted to temperature using a species-weighted scattering cross section, based on the Raman measurements. Linear laser-induced fluorescence (LIF) was used to measure OH and NO, and the fluorescence signals were corrected on a shot-to-shot basis for variations in Boltzmann fraction and collisional quenching rate. The concentration of CO was measured by Raman scattering and by two-photon laser-induced fluorescence (TPLIF).
TEST CASE EXP1
Description of Experiment
Boundary Data
Measurement Errors
Measured Data
References
TEST CASE EXP2
(as per EXP 1)
Contributed by: Andrzej Boguslawski — Technical University of Częstochowa
© copyright ERCOFTAC 2024