EXP 1-4 Description: Difference between revisions

From KBwiki
Jump to navigation Jump to search
Line 21: Line 21:
| High || 3 m/s || 701.7 || 900
| High || 3 m/s || 701.7 || 900
|}
|}


The principal quantities measured are given in section [[Lib:EXP 1-4 Measurement Quantities and Techniques]].
The principal quantities measured are given in section [[Lib:EXP 1-4 Measurement Quantities and Techniques]].


Further details on the test case can be found in the following publication:
Further details on the test case can be found in the following publication:

Revision as of 11:46, 24 July 2023

Axisymmetric drop impact dynamics on a wall film of the same liquid

Front Page

Introduction

Review of experimental studies

Description

Experimental Set Up

Measurement Quantities and Techniques

Data Quality and Accuracy

Measurement Data and Results

Description of Study Test Case

The liquid used in the experiments is silicone oil (density ρ = 920 kg/m3, kinematic viscosity ν = 5 ⋅ 10-6 m2/s, surface tension σ = 0.0177 N/m) and the ambient gas is air (density 1.2 kg/m3, kinematic viscosity 1.52 ⋅ 10-5 m2/s). The film height h = 500 μm as well as the drop diameter D = 1.5 mm are kept fixed, resulting in the dimensionless film thickness δ = h/D = 0.33. The drop velocity U is varied from 1 to 3 m/s. Accordingly, the Weber number We = ρDU2/σ is in the range 78 – 702 while the Reynolds number Re = DU/ν is in the range 300 – 900.

Investigated drop impact velocities
Impact energy Impact velocity Weber number Reynolds number
Low 1 m/s 78.0 300
Moderate 2 m/s 311.9 600
High 3 m/s 701.7 900


The principal quantities measured are given in section Lib:EXP 1-4 Measurement Quantities and Techniques.

Further details on the test case can be found in the following publication:

M. Bagheri, B. Stumpf, I.V. Roisman, C. Tropea, J. Hussong, M. Wörner, H. Marschall, Interfacial relaxation – Crucial for phase-field methods to capture low to high energy drop-film impacts, Int. J. Heat Fluid Flow 94 (2022) 108943, https://doi.org/10.1016/j.ijheatfluidflow.2022.108943




Contributed by: Milad Bagheri, Bastian Stumpf, Ilia V. Roisman, Cameron Tropea, Jeanette Hussong, Martin Wörner, Holger Marschall — Technical University of Darmstadt and Karlsruhe Institute of Technology

Front Page

Introduction

Review of experimental studies

Description

Experimental Set Up

Measurement Quantities and Techniques

Data Quality and Accuracy

Measurement Data and Results


© copyright ERCOFTAC 2024