EXP 1-4 Review of Studies

From KBwiki
Jump to navigation Jump to search

Axisymmetric drop impact dynamics on a wall film of the same liquid

Front Page

Introduction

Review of experimental studies

Description

Experimental Set Up

Measurement Quantities and Techniques

Data Quality and Accuracy

Measurement Data and Results

Review of Experimental Studies and choice of test case

Provide a brief review of past experimental studies of this test case . Identify your chosen study and
state the test case underlying the study, giving reasons for its choice ( e.g. a well-constructed test
case, allowing good quality control and accurate measurements, of scientific and/or practical interest
and as test case for CFD studies). Indicate whether or not the experiments have been designed for
the purpose of CFD validation (desirable but not mandatory).

A review of experimental studies on mass and momentum interactions during drop impact on a liquid film is provided by Liang & Mudawar (2016). For an overview on important experimental studies and findings since then we refer to Stumpf et al. (2023).

In the literature, there are no experiments on the dynamics of the droplet-wall-film interaction for droplet impact on a wetted wall in the event that the process is rotationally symmetrical. Such data are highly relevant for the development of simulation methods, since the numerical effort remains limited compared to 3D calculations and extensive comparative studies can be carried out.

The experiments have been designed for the validation of CFD methods for numerical simulation of two-phase flows where the gas-liquid interface is well resolved.

G. Liang, I. Mudawar, Review of mass and momentum interactions during drop impact on a liquid film, Int. J. Heat Mass Transf., 101 (2016) 577-599, https://doi.org/10.1016/j.ijheatmasstransfer.2016.05.062

B. Stumpf, I.V. Roisman, A.L. Yarin, C. Tropea, Drop impact onto a substrate wetted by another liquid: corona detachment from the wall film, J. Fluid Mech., 956 (2023) A10, https://doi.org/10.1017/jfm.2022.1060




Contributed by: Bastian Stumpf, Milad Bagheri, Ilia V. Roisman, Cameron Tropea, Jeanette Hussong, Martin Wörner, Holger Marschall — Technical University of Darmstadt and Karlsruhe Institute of Technology

Front Page

Introduction

Review of experimental studies

Description

Experimental Set Up

Measurement Quantities and Techniques

Data Quality and Accuracy

Measurement Data and Results


© copyright ERCOFTAC 2024