Test Data AC6-14
Swirling flow in a conical diffuser generated with rotor-stator interaction
Application Challenge AC6-14 © copyright ERCOFTAC 2024
Overview of Tests
A closed loop experimental test rig was developed and measuresd at the Politehnica University of Timi\c soara, Romania, ~\cite{Resiga2007} for investigating decelerated swirling flows in a conical diffuser and for assessing various flow control methods. The test rig includes the following (see Fig. \ref{circuit}): (i) a main hydraulic circuit, marked blue; (ii) an auxiliary hydraulic circuit, marked red that is implemented in order to assess different control methods ~\cite{Tanasa2013,Bosioc2012}; (iii) a lower reservoir with a volume of 4$\textrm{m}^3$; (iv) a main pump that is able to provide a maximum flow rate of 40 l/s; (v) an upper reservoir equipped with a honeycomb section to provide an uniform flow at the inlet of the swirl test section, and (vi) a test section, marked magenta.
|File:AC6-14 TimisoaraTestRigSchetch |
Figure 2: Photo and schematic view of experimental closed loop test rig from UPT |
TEST CASE EXP1
Description of Experiment
Boundary Data
Measurement Errors
Measured Data
References
TEST CASE EXP2
(as per EXP 1)
Contributed by: A. Javadi, A. Bosioc, H Nilsson, S. Muntean, R. Susan-Resiga — Chalmers University of Technology
© copyright ERCOFTAC 2024