2D Boundary layers with pressure gradients (A)

Underlying Flow Regime 3-03 © copyright ERCOFTAC 2004

References

Bachalo, W. D., and Johnson, D. A., (1985), “Transonic turbulent boundary layer separation generated on an axisymmetric flow model”, AIAA J. Vol. 23, pp.1684-1692.

Bardina, J. E., Huang, P. G. and Coakley, T. J., (1997), “Turbulence modeling validation”, AIAA 97-212, 28^th AIAA Fluid Dynamics Conference.

Bogar, T. J., Sajben, M., and Kroutil, J. C. (1983), “Characteristic frequencies of transonic diffuser flow oscillations”, AIAA Journal, Vol. 21, No. 9, pp. 1232-1240.

Buice, C.U.; Eaton, J.K. (1997), “Experimental investigation of flow through an asymmetric plane diffuser”, ME. Dept., Stanford Univ. Rep. TSD-107.

Clauser, F., (1954), Turbulent boundary layers in adverse pressure gradients, J. Aeronautical Science, Vol. 21, pp 91-108.

Driver, D. M. and Johnston, J. P. (1990), Experimental study of a three-dimensional shear-driven turbulent boundary layer with streamwise adverse pressure gradient, NASA Technical Memorandum 102211.

Driver, D. M. (1991), Reynolds shear stress measurements in a separated boundary layer flow AIAA-91-1787.

ERCOFTAC/IAHR/COST 8^th Workshop on Refined Turbulence Modelling, Helsinki, Finland, 1999 (http://www.cfdthermo.hut.fi/wshop99/proceedings/workshop.pdf)

ERCOFTAC/IAHR/COST 10^th Workshop on Refined Turbulence Modelling, Poitiers, 2002.

Esch T., Menter, F. R., and Vieser W., (2003), Heat tranfer prediction based on two-equation turbulence models, ASME paper TED-AJ03-542, Hawaii.

Gatski, T. B. and Speziale, C.G., (1993), On explicit algebraic stress models for complex turbulent flows, Journal of Fluid Mechanics, 254, pp.59-75.

Hancock, P. E. (2000), Low Reynolds number two-dimensional separated and reattaching turbulent shear flow, J. Fluid Mech. 410, 101-122.

Hellsten, A. and Laine, S., (2000), Explicit algebraic Reynolds Stress Modelling in decelerating and separating flows, AIAA Paper 2000-2313.

Hsu, M. C., Vogiatzis, K. and Huang, P. G., Validation and implementation of advanced turbulence models for swirling and separated flows, AIAA Paper 2003-0766.

Johnson, D.A. and King, L.S., 1984, A new turbulence closure model for boundary layer flows with strong adverse pressure gradients and separation, AIAA Paper 1984-0175.

Johnson, D.A., Menter, F.R., and Rumsey C.L., 1994, The status of turbulence modeling for aerodynamics, AIAA Paper 1994-2226.

Jones, W.P. and Launder, B.E., (1972), The prediction of laminarization with a two-equation model of turbulence. International Journal of Heat and Mass Transfer, 15.

Kline , S.J., Markovin, M. V., Sovran, G., Cockrell, D. J., Coles, D. E. and Hirst, E. A. editors, (1969), Proceedings of the Computation of Turbulent Boundary Layers 1968 AFSOR-IFP-Stanford Conference, Vol. 1-2, Thermoscience Division, Dept. of Mechanical Engineering, Stanford University.

Kline, S.J., Cantwell, B. J., and Lilley, G. M.,. editors, (1981), Proceedings of the Computation of Turbulent Boundary Layers 1980-1981 AFSOR-HTTM-Stanford Conference on Complex Turbulent Flows, Comparison of Computation and Expriments, Vol. 1-3, Thermoscience Division, Dept. of Mechanical Engineering, Stanford University.

Launder, B. E., Reece, G. J. and Rodi, W., (1975), Progress in the development of a Reynolds-Stress turbulence closure, Journal of Fluid Mechanics, Vol. 68, pp. 537-566.

Menter, F.R., (1993), Zonal two-equation k-w turbulence model for aerodynamic flows, AIAA Paper 1993-2906

Menter, F.R., (1994), Two-equation eddy-viscosity turbulence models for engineering applications. AIAA-Journal, 32(8), pp. 269-289.

Na, Y. and Moin, P. (1998), Numerical separation of a separated turbulent boundary layer, J. Fluid Mech. 374, 379-405.

Obi, S, Aoki, K and Madsuda, S. (1993), Experimental and computational study of turbulent separating flow in an asymmetric plane diffuser, 9th Symp. on Turbulent Shear Flows, Kyoto, paper P305.

Perry, A., (1966), Turbulent boundary layers in decreasing adverse pressure gradients, J. Fluid Mechanics, Vol. 26, pp. 481-506.

Perry, A., and Schofield, W. H., (1973), Mean velocity and shear stress distribution in turbulent boundary layers, Physics of Fluids, Vol. 16. No. 12. pp. 2068-2081.

Rodi, W., and Scheuerer, G. (1986), Scrutinizing the k-ε turbulence model under adverse pressure gradient conditions, J. Fluids Engg 108, 174.

Samuel, A. E., and Joubert, P. N., (1974), A boundary layer developing in an increasingly adverse pressure gradient, J. Fluid Mechanics, Vol. 66, pp. 481-505.

Schofiled, W. H., (1981), Equilibrium boundary layers in moderate to strong adverse pressure gradients, J. Fluid Mechanics, Vol. 113, pp. 91-122.

Simpson, R. L., Chew, Y. T., and Shivaprasad, B. G., (1981), The structure of a separating turbulent boundary layer, Part I and Part II, J. Fluid Mechanics, Vol. 113.

Schubauer, G. B., and Spangenberg, W. G., (1960), Forced mixing in boundary layers, J. Fluid Mechanics, Vol. 8, pp. 10-32.

Spalart, P. R. and Allmaras, S.R., (1994), A one-equation turbulence model for aerodynamic flows, La Rech. Aerospatiale, V.1, pp.5-21.

Spalart, P. R, and Coleman, G. N., (1997), Numerical study of a separated bubble with heat transfer, European J. Mechanics B/Fluids 16, 169.

Speziale, C. G., Sarkar, S. and Gatski, T. B., (1991), Modelling the pressure-strain correlation of turbulence, Journal of Fluid mechanics, Vol. 227, pp. 245-272.

Wallin S., and Johannson, A. V., (2002), Modelling streamline curvature effects in explicit algebraic Reynolds stress turbulence models, Int. J. Heat and Fluid Flow, Vol. 23, pp.721-730.

Wilcox, D.C., (1993), Turbulence Modeling for CFD. DCW Industries, Inc., La Canada, CA, 1993.

Yakhot, V. Orszag, S. A., Tangham, S., Gatski, T. B., and Speziale, C. G., (1992), Development of turbulence models for shear flows by a double expansion technique », Physics of Fluids, Vol 4 (7).

Contributors: Florian Menter - AEA Technology