Lib:Create_Ercoftac_Article_Form

==

Underlying Flow Regime 3-36

References

D. Greenblatt, K. B. Paschal, C.-. S. Yao, J. Harris, N. W. Schaeffler and A. E. Washburn Experimental Investigation of Separation Control Part 1: Baseline and Steady Suction. AIAA Journal, 44(12):2820–2830, 2006
D. Greenblatt, K. B. Paschal, C.-. S. Yao and J. Harris Experimental Investigation of Separation Control Part 2: Zero Mass-Flux Oscillatory Blowing. AIAA Journal, 44(12):2831–2845, 2006
S. Zhang and S. Zhong Turbulent Flow Separation over a Two-Dimensional Ramp Using Synthetic Jets. AIAA Journal, 49(12):2637–2649, 2011
Y. Bentaleb, S. Lardeau and M. A. Leschziner Large-eddy simulation of turbulent boundary layer separation from a rounded step, Journal of Turbulence, 13(4):1–28, 2012
C. L. Rumsey LES: 2-D curved backward-facing step, Available: https://turbmodels.larc.nasa.gov/Other_LES_Data/curvedstep.html. 2021
K. J. Disotell and C. L. Rumsey Development of an Axisymmetric Afterbody Test Case for Turbulent Flow Separation Validation, NASA/TM-2017-219680, Langley Research Center, 2017
K. J. Disotell and C. Rumsey Modern CFD Validation of Turbulent Flow Separation on Axisymmetric Afterbodies, NASA/Umich Symposium on Advances in Turbulence Modeling, 2017
D. Schwamborn, T. Gerhold and R. Kessler The DLR TAU-Code: Recent Applications in Research and Industry, ECCOMAS CFD 2006 Conference, Netherlands, 2006
S. R. Allmaras, F. T. Johnson and P. R. Spalart Modifications and Clarifications for the Implementation of the Spalart-Allmaras Turbulence Model, ICCFD7-1902, 7th International Conference on Computational Fluid Dynamics, Big Island, Hawaii, 2012
M. L. Shur, M. K. Strelets, A. K. Travin and P. R. Spalart Turbulence Modeling in Rotating and Curved Channels: Assessing the Spalart-Shur Correction, AIAA Journal,38(5):784–792, 2000
P. R. Spalart Strategies for Turbulence Modelling and Simulation, International Journal of Heat and Fluid Flow,21:252–263, 2000
P. R. Spalart private communication, 2020
P. R. Spalart and A. V. Garbaruk, A correction to the Spalart-Allmaras Turbulence Model, Providing More Accurate Skin Friction, AIAA journal, 2020
F. Menter, M. Kuntz and R. Langtry, Ten Years of Industrial Experience with the SST Turbulence Model,Turbulence, Heat and Mass Transfer 4, 625–632, 2003
P. Smirnov and F. R. Menter Sensitization of the SST Turbulence Model to Rotation and Curvature by Applying the Spalart-Shur Correction Term, ASME Journal of Turbomachinery, 131;2009
B. Eisfeld, C. Rumsey and V. Togiti Verification and Validation of a Second-Moment-Closure Model, AIAA Journal,54(5):1524–1541;2016
B. Eisfeld and C. Rumsey Length-Scale Correction for Reynolds Stress Modeling, AIAA Aviation Forum, 2019
S. Hosseini, R. Vinuesa, P. Schlatter, A. Hanifia and D. Henningson Direct numerical simulation of the flow around a wing section at moderate Reynolds number, International Journal of Heat and Fluid Flow, 61:117–128, 2016
Schlatter, P. and Örlü, R. Turbulent boundary layers at moderate Reynolds numbers: inflow length and tripping effects,Journal of Fluid Mechanics, 710:5–34, 2012

J. Neumann and H. Wengle Coherent structures in controlled separated flow over sharp-edged and rounded steps, Journal of Turbulence, 5(22):1–24, 2004

S. Radhakrishnan and U. Piomelli and A. Keating Wall-modeled large-eddy simulations of flows with curvature and mild separation, Journal of Fluids Engineering, 130:101203, 2008

S. Radhakrishnan and U. Piomelli and A. Keating and A. S. Lopes Reynolds-averaged and large-eddy simulations of turbulent non-equilibrium flows, Journal of Turbulence, 7(63):1–30, 2006

Rhie, CM and Chow, WL Numerical study of the turbulent flow past an airfoil with trailing edge separation, AIAA journal, 21(11):1525–1532, 1983

Rodi, W. Experience with two-layer models combining the k-epsilon model with a one-equation model near the wall, In 29th AIAA Aerospace Sciences Meeting, Volume 1, 1991

Schlatter, P. and Örlü, R. Assessment of direct numerical simulation data of turbulent boundary layers, Journal of Fluid Mechanics, 659:116–126, 2010

Shih, T.H. and Liou, W.W. and Shabbir, A. and Yang, Z. and Zhu, J. A new k-[epsilon] eddy viscosity model for high reynolds number turbulent flows, Computers & Fluids, 24(3):227–238, 1995

S. Song and J. K. Eaton Reynolds number effects on a turbulent boundary layer with separation, reattachment, and recovery, Experiments in Fluids, 36(2):246–258, 2004

C. Wang and Y. J. Jang and M. A. Leschziner Modelling two- and three-dimensional separation from curved surfaces with anisotropy-resolving turbulence closures, International Journal of Heat and Fluid Flow, 25:499–512, 2004

B. Wasistho and K.D. Squires Prediction of turbulent separation over a backward-facing smooth ramp, Journal of Turbulence, 6:1–26, 2005

Wilcox, D.C., American Institute of Aeronautics and Astronautics Turbulence modeling for CFD, volume 2 DCW industries La Canada, CA

Zhang, S. and Zhong, S. An experimental investigation of turbulent flow separation control by an array of synthetic jets, AIAA Paper, 2010-4582, 2010

Contributed by: Erij Alaya and Cornelia Grabe — Deutsches Luft-und Raumfahrt Zentrum (DLR)