EXP 1-4 Description: Difference between revisions
| Line 29: | Line 29: | ||
For the '''low energy impact''' the drop joins the liquid film smoothly without formation of a rim or crown. In this ''deposition regime'', the drop spreads on the surface of the liquid film forming a disk-shaped structure. In the later stage, capillary waves propagate on the surface of film without formation of a notable central dome. | For the '''low energy impact''' the drop joins the liquid film smoothly without formation of a rim or crown. In this ''deposition regime'', the drop spreads on the surface of the liquid film forming a disk-shaped structure. In the later stage, capillary waves propagate on the surface of film without formation of a notable central dome. | ||
For the '''moderate energy impact''' a rising crown is formed at the boundary between the residual and the initial film where there is a kinematic discontinuity due to the jump in both the film thickness and the local velocity field. The crown ascend continues as long as the inertial forces dominate the surface tension forces. The free rim at the top of the crown wall remains stable | For the '''moderate energy impact''' a rising crown is formed at the boundary between the residual and the initial film where there is a kinematic discontinuity due to the jump in both the film thickness and the local velocity field. The crown ascend continues as long as the inertial forces dominate the surface tension forces. The free rim at the top of the crown wall remains stable so that the case corresponds to the ''crown formation without break-up regime''. In the late stage, a dome like structure forms at the impact center without jetting. | ||
Further details on the test case can be found in the following publication: | Further details on the test case can be found in the following publication: | ||
Revision as of 08:19, 2 August 2023
Axisymmetric drop impact dynamics on a wall film of the same liquid
Description of Study Test Case
A sketch of the general set-up of the experiment and the geometry is shown in Fig. 3 in Section Lib:EXP 1-4 Experimental Set Up while the principal quantities measured are given in Section Lib:EXP 1-4 Measurement Quantities and Techniques.
The liquid used in the experiments is silicone oil (density ρ = 920 kg/m3, kinematic viscosity ν = 5 ⋅ 10-6 m2/s, surface tension σ = 0.0177 N/m) and the ambient gas is air (density 1.2 kg/m3, kinematic viscosity 1.52 ⋅ 10-5 m2/s). The film height h = 500 μm as well as the drop diameter D = 1.5 mm are kept fixed, resulting in the dimensionless film thickness δ = h/D = 0.33. The drop velocity U is varied from 1 to 3 m/s. Accordingly, the Weber number We = ρDU2/σ is in the range 78 – 702 while the Reynolds number Re = DU/ν is in the range 300 – 900.
For each impact velocity a video is provided for download in Table 1. The meaning of the file names is as follows: S5 = silicon oil viscosity 5 mm^2/s, D1p5 = drop diameter 1.5 mm , H500 = film height 500 µm. The digit after U denotes the drop impact velocity in m/s, e.g. U3 = 3 m/s.
| Impact energy | Impact velocity | Weber number | Reynolds number | Video for download |
|---|---|---|---|---|
| Low | 1 m/s | 78.0 | 300 | Download S5_D1p5_H500_U1 |
| Moderate | 2 m/s | 311.9 | 600 | Download S5_D1p5_H500_U2 |
| High | 3 m/s | 701.7 | 900 | Download S5_D1p5_H500_U3 |
For the low energy impact the drop joins the liquid film smoothly without formation of a rim or crown. In this deposition regime, the drop spreads on the surface of the liquid film forming a disk-shaped structure. In the later stage, capillary waves propagate on the surface of film without formation of a notable central dome.
For the moderate energy impact a rising crown is formed at the boundary between the residual and the initial film where there is a kinematic discontinuity due to the jump in both the film thickness and the local velocity field. The crown ascend continues as long as the inertial forces dominate the surface tension forces. The free rim at the top of the crown wall remains stable so that the case corresponds to the crown formation without break-up regime. In the late stage, a dome like structure forms at the impact center without jetting.
Further details on the test case can be found in the following publication:
M. Bagheri, B. Stumpf, I.V. Roisman, C. Tropea, J. Hussong, M. Wörner, H. Marschall, Interfacial relaxation – Crucial for phase-field methods to capture low to high energy drop-film impacts, Int. J. Heat Fluid Flow 94 (2022) 108943, https://doi.org/10.1016/j.ijheatfluidflow.2022.108943
Contributed by: Milad Bagheri, Bastian Stumpf, Ilia V. Roisman, Cameron Tropea, Jeanette Hussong, Martin Wörner, Holger Marschall — Technical University of Darmstadt and Karlsruhe Institute of Technology
© copyright ERCOFTAC 2024