EXP 1-4 Introduction

Axisymmetric drop impact dynamics on a wall film of the same liquid

Front Page

Introduction

Review of experimental studies

Description

Experimental Set Up

Measurement Quantities and Techniques

Data Quality and Accuracy

Measurement Data and Results

Introduction

Give a brief overview of the EXP in question. Describe the main characteristics of the type of flow. In particular, what are the underlying flow physics which characterise this test case and the main quantities of interest.

Droplet impact onto wetted surfaces is of pertinence to many technical applications such as internal combustion engines, icing on plane wings and spray coating technologies to name a few. Immediately after the impact, the droplet expands radially along the surface. If the impact kinetic energy is sufficiently high, an upward growing crown is generated with detachment of secondary droplets. For the cases considered here, splashing is absent and the drop-film interaction is axisymmetric. The two-phase flow is laminar and its dynamics is governed by an interplay between inertial, viscous and capillary forces. As main quantities of interest, the experiment provides data for the time evolution of three characteristic dimensions of the crown forming during the drop-film interaction.

---

Contributed by: Bastian Stumpf, Milad Bagheri, Ilia V. Roisman, Cameron Tropea, Jeanette Hussong, Martin Wörner, Holger Marschall — Technical University of Darmstadt and Karlsruhe Institute of Technology

Front Page

Introduction

Review of experimental studies

Description

Experimental Set Up

Measurement Quantities and Techniques

Data Quality and Accuracy

Measurement Data and Results

© copyright ERCOFTAC 2024