EXP 1-1 Measurement Data and Results

Lib:Create_Ercoftac_Article_Form

Front Page

Introduction

Review of experimental studies

Description

Experimental Set Up

Measurement Quantities and Techniques

Data Quality and Accuracy

Measurement Data and Results

Measurement data/results

Numerical data from the PDA measurements, together with image type data from HSC are available for this test case.

Measurement data from PDA

Measurement data exported directly from the PDA software are provided as a set of .txt files. These contain raw, unprocessed information exported from the PDA system. The data are arranged in directories, where each directory contains a single airflow velocity case with a number of files for all the measured positions (Figure 10). Each data file contains raw information from a single-point measurement. The first five rows give the experiment description. Here only the fourth row is important, which documents the measurement position. The following rows document individual droplets sampled; each droplet is reported on a separate line. The first column addresses the sample number (Row#), followed by its arrival time to the measurement volume (AT, [ms]), the transit time through the measurement volume (TT, [µs]), velocity in Z-direction (LDA1, [m/s]), velocity in Y-direction (LDA4, [m/s]), a phase shift between photomultipliers 1 and 2 (U12, [°]), a phase shift between photomultipliers 1 and 3 (U13, [°]), and droplet diameter (D, [µm]).
Of practical importance are the LDA1 and LDA4, which give information on the droplet velocity in 2D and can be used for the calculation of droplet velocity magnitude (in 2D) and its motion direction. The D allows the calculation of droplet surface and volume.
The data in rows can be analysed and filtered in different ways to produce the size and velocity histograms, calculate the mean velocity or mean diameters, droplet concentration or other statistical moments as described in [59]. The velocity of the smallest droplets allows for estimating the local air velocity [62].
The AT adds the temporal information, which is useful for the analysis of steadiness [63], [64] and mean and turbulent kinetic energies in the spray [4] or frequency spectra. The columns of U12 and U13 give system information from photomultipliers which are primarily used by the measurement system for the calculation of D, and following the relation between U12 and U13 allows for droplet size validation to be done during the measurement [65]. It has no direct data assimilation for common users but might be used by advanced users if more sophisticated processing is required.
These multiple files of raw data were processed into Excel spreadsheet processed_data.xlsx to show the statistical data in each measurement position (columns A, B and C), number of droplets sampled (D), velocity validation (E), mean droplet velocity in Z-direction (F), mean droplet velocity in Y-direction (G), spherical validation (H), diameters $D_{10}$ (I), $D_{20}$ (J), $D_{32}$ (K), and relative diameter span factor, $RSF$ (L). The mean droplet velocity and diameters were calculated according to Eq. (3) and (6), respectively, in [59] and Equation (4). The relative span factor

$RSF={\frac {D_{v0.9}-D_{v0.1}}{D_{v0.5}}}$

---

Contributed by: Ondrej Cejpek, Milan Maly, Ondrej Hajek, Jan Jedelsky — Brno University of Technology

Front Page

Introduction

Review of experimental studies

Description

Experimental Set Up

Measurement Quantities and Techniques

Data Quality and Accuracy

Measurement Data and Results

© copyright ERCOFTAC 2024