DNS 1-5 Statistical Data: Difference between revisions
(New article page for DNS_1-5_statistical) |
|||
| Line 7: | Line 7: | ||
= Statistical data = | = Statistical data = | ||
==Volume data== | ==Volume data== | ||
In this section the relevant statistical data for the flow on the smooth bump computed with MIGALE is given. The reported data is the one mentioned in Table 2 of the list of desirable quantities (PDF) and also specified here. | |||
The data is available as: | |||
* In CSV (text) format as characteristic lines along over the solid wall. | |||
* In .pvtu (ASCII) format as volumetric data. | |||
==Additional data== | ==Additional data== | ||
Revision as of 12:22, 15 September 2022
Statistical data
Volume data
In this section the relevant statistical data for the flow on the smooth bump computed with MIGALE is given. The reported data is the one mentioned in Table 2 of the list of desirable quantities (PDF) and also specified here.
The data is available as:
- In CSV (text) format as characteristic lines along over the solid wall.
- In .pvtu (ASCII) format as volumetric data.
Additional data
Here additional statistical data should be provided such as data on solid surfaces and integral
time scales as specified respectively in sections 4 and 5 of [1]. Further global quantities of interest
( e.g. drag/lift coefficients, mass flow rates, efficiencies, . . . ) should be given here and if need be
the procedure should be described in detail. Indicate how the data were non-dimensionalised.
Contributed by: Francesco Bassi, Alessandro Colombo, Francesco Carlo Massa — Università degli studi di Bergamo (UniBG)
© copyright ERCOFTAC 2024