EXP 1-4 Description: Difference between revisions
m (Mike moved page Lib:EXP 1-4 Description to EXP 1-4 Description) |
|
(No difference)
|
Revision as of 09:48, 17 August 2023
Axisymmetric drop impact dynamics on a wall film of the same liquid
Description of Study Test Case
A sketch of the general set-up of the experiment and the geometry is shown in Fig. 3 in Section Lib:EXP 1-4 Experimental Set Up while the principal quantities measured are given in Section Lib:EXP 1-4 Measurement Quantities and Techniques. The liquid used in the experiments is silicone oil (density ρ = 920 kg/m3, kinematic viscosity ν = 5 ⋅ 10-6 m2/s, surface tension σ = 0.0177 N/m) and the ambient gas is air (density 1.2 kg/m3, kinematic viscosity 1.52 ⋅ 10-5 m2/s). The film height h = 500 μm as well as the drop diameter D = 1.5 mm are kept fixed, resulting in the dimensionless film thickness δ = h/D = 0.33. The drop velocity U is varied from 1 to 3 m/s. Accordingly, the Weber number We = ρDU2/σ is in the range 78 – 702 while the Reynolds number Re = DU/ν is in the range 300 – 900, see Table 1. For each impact velocity a video is provided for download. The meaning of the file names is as follows: S5 = silicon oil with kinematic viscosity 5 mm2/s, D1p5 = drop diameter 1.5 mm , H500 = film height 500 µm. The digit after U denotes the drop impact velocity in m/s, e.g. U3 = 3 m/s.
Impact energy | Impact velocity | Weber number | Reynolds number | Link for video download |
---|---|---|---|---|
Low | 1 m/s | 78.0 | 300 | Download S5_D1p5_H500_U1 |
Moderate | 2 m/s | 311.9 | 600 | Download S5_D1p5_H500_U2 |
High | 3 m/s | 701.7 | 900 | Download S5_D1p5_H500_U3 |
Contributed by: Milad Bagheri, Bastian Stumpf, Ilia V. Roisman, Cameron Tropea, Jeanette Hussong, Martin Wörner, Holger Marschall — Technical University of Darmstadt and Karlsruhe Institute of Technology
© copyright ERCOFTAC 2024