UFR 4-16 References: Difference between revisions
Jump to navigation
Jump to search
m (moved UFR 4-16 References to Lib:UFR 4-16 References) |
m (Dave.Ellacott moved page SilverP:UFR 4-16 References to UFR 4-16 References) |
||
(56 intermediate revisions by the same user not shown) | |||
Line 7: | Line 7: | ||
==Confined flows== | ==Confined flows== | ||
===Underlying Flow Regime 4-16=== | ===Underlying Flow Regime 4-16=== | ||
<div id="0"></div> | |||
= References = | = References = | ||
# <div id="1">'''Abe, K. and Ohtsuka, T. (2010):''' An investigation of LES and Hybrid LES/RANS models for predicting 3-D diffuser flow. ''Int. J. Heat and Fluid Flow'' , Vol. 31(5), pp. 833–844</div> | |||
#<div id="2">'''Bradshaw, P. and Wong, F.Y.F.:''' The reattachment and relaxation of a turbulent shear layer. ''J. Fluid Mech.'', Vol. 52(1), pp. 113–135, 1972</div> | |||
#<div id="3">'''Breuer, M. (2010):''' A hybrid LES-URANS approach for non-equilibrium turbulent flows such as 3-D diffuser flows. ''8th Int. ERCOFTAC Symp. on Engineering Turbulence Modelling and Measurements'' (ETMM8), Marseille, France, June 9–11</div> | |||
#<div id="4">'''Buice, C.U. and Eaton, J.K. (1996):''' Experimental investigation of flow through an asymmetric plane diffuser. CTR Annual Research Briefs, pp. 243–248</div> | |||
#<div id="5">'''Buice, C.U. and Eaton, J.K. (2000):''' Experimental investigation of flow through an asymmetric plane diffuser. ''ASME J. Fluids Eng.'', Vol. 122, pp. 433–435</div> | |||
#<div id="6">'''Cherry, E. M., Iaccarino, G., Elkins, C.J. and Eaton, J.K. (2006):''' Separated flow in a three-dimensional diffuser: preliminary validation. Center for Turbulence Research, Stanford University, ''Annual Research Brief 2006'', pp. 31–40</div> | |||
#<div id="7">'''Cherry, E.M., Elkins, C.J. and Eaton, J.K. (2008):''' Geometric sensitivity of three-dimensional separated flows. ''Int. J. of Heat and Fluid Flow'', Vol. 29(3), pp. 803–811</div> | |||
#<div id="8">'''Cherry, E.M., Elkins, C.J. and Eaton, J.K. (2009):''' Pressure measurements in a three-dimensional separated diffuser. ''Int. J. of Heat and Fluid Flow'', Vol. 30(1), pp. 1–2</div> | |||
#<div id="9">'''Fröhlich, J. and von Terzi, D. (2008):''' Hybrid LES/RANS methods for the simulation of turbulent flows. ''Prog. Aerosp. Sci.'', Vol. 44, pp. 349–377</div> | |||
#<div id="10">'''Grundmann, S., Sayles E. L. and Eaton J. K. (2011):''' Sensitivity of an asymmetric 3D diffuser to plasma-actuator induced inlet condition perturbations. ''Experiments in Fluids'', Vol. 50(1), pp. 217–231</div> | |||
#<div id="11">'''Grundmann, S., Sayles E. L. and Eaton J. K. (2012):''' Sensitivity of an asymmetric 3D diffuser to vortex-generator induced inlet condition perturbations. ''Experiments in Fluids'', Vol. 52(1), pp. 11–21</div> | |||
#<div id="12">'''Gullman-Strand, J., Törnblom, O., Lindgren, B., Amberg, G. and Johansson, A.V. (2004):''' Numerical and experimental study of separated flow in a plane asymmetric diffuser. ''Int. J. Heat Fluid Flow'', Vol. 25(3), pp. 451–460</div> | |||
#<div id="13">'''Hellsten, A. and Rautaheimo, P. (editors), (1999):''' ''Proceedings of the 8th ERCOFTAC/IAHR/COST Workshop on Refined Turbulence Modelling'', 17–18 June. Helsinki University of Technology</div> | |||
#<div id="14">'''Jakirlić, S., Kadavelil, G., Kornhaas, M., Schäfer, M., Sternel, D.C. and Tropea, C. (2010a):''' Numerical and Physical Aspects in LES and Hybrid LES/RANS of Turbulent Flow Separation in a 3-D Diffuser. ''Int. J. Heat and Fluid Flow'', Vol. 31(5), pp. 820–832</div> | |||
#<div id="15">'''Jakirlić, S., Kadavelil, G., Sirbubalo, E., von Terzi, D., Breuer, M. and Borello, D. (2010b):''' 14th ERCOFTAC SIG15 Workshop on Turbulence Modelling: Turbulent Flow Separation in a 3-D Diffuser. "Sapienza" University of Rome, September 18, 2009, ''ERCOFTAC Bulletin'', December Issue, No. 85, pp. 5–13</div> | |||
#<div id="16">'''Jeyapaul, E. and Durbin, P. (2010):''' Turbulent separation in a three-dimensional diffuser. ''8th Int. ERCOFTAC Symp. on Engineering Turbulence Modelling and Measurements'' (ETMM8), Marseille, France, June 9–11</div> | |||
#<div id="17">'''John-Puthenveettil, G. (2012):''' Computational modelling of complex flows using eddy-resolving turbulence models accounting for the near-wall turbulence. PhD Thesis, Technische Universitaet Darmstadt</div> | |||
#<div id="18">'''Maduta, R. and Jakirlić, S. (2011):''' An eddy-resolving Reynolds stress transport model for unsteady flow computations. ''4th Symposium on Hybrid RANS-LES Methods'', Beijing, China, September 28–30. In "Advances in Hybrid RANS-LES Modelling 4", 2012. ''Notes on Numerical Fluid Mechanics and Multidisciplinary Design'', Springer ISBN 978-3-642-31817-7, Fu. S et al. (Eds.)</div> | |||
#<div id="19">'''Mehdizadeh, O.Z, L. Temmerman, B. Tartinville and Ch. Hirsch (2012):''' Applications of EARSM Turbulence Models to Internal Flows. Paper No. GT2012-68886, Proceedings of ASME Turbo Expo 2012, June 11–15, 2012, Copenhagen, Denmark</div> | |||
#<div id="20">'''Menter, F. and Egorov, Y. (2010):''' The Scale-adaptive Simulation method for unsteady turbulent flow predictions. Part 1: theory and model description. ''Flow, Turbulence and Combustion'', Vol. 85, pp. 113–138</div> | |||
#<div id="21">'''Nagano, Y., Tagawa, M. and Tsuji, T. (1993):''' Effects of Adverse Pressure Gradient on mean Flows and Turbulent Statistics in a Boundary Layer. ''Turbulent Shear Flows'' 8, Durst et al. (editors), p. 7, Springer Verlag</div> | |||
#<div id="22">'''Obi, S., Aoki, K. and Masuda, S.:''' Experimental and computational study of turbulent separating flow in an asymmetric plane diffuser. Proc. ''9th Symp. on Turbulent Shear Flows'', Kyoto, Japan, August 16–19, pp. 305.1–305.5, 1993</div> | |||
#<div id="23">'''Ohlsson, J., Schlatter, P., Fischer P.F. and Henningson, D.S. (2009):''' DNS of three-dimensional separation in turbulent diffuser flows. In ''Advances in Turbulence XII'', Proceedings of the 12th EUROMECH European Turbulence Conference, Marburg. Springer Proceedings in Physics, Vol. 132, ISBN 978-3-642-03084-0</div> | |||
#<div id="24">'''Ohlsson, J., Schlatter, P., Fischer P.F. and Henningson, D.S. (2010):''' DNS of separated flow in a three-dimensional diffuser by the spectral-element method. ''J. Fluid Mech.'', Vol. 650, pp. 307–318</div> | |||
#<div id="25">'''Schneider, H., von Terzi D., Bauer, H.-J. and Rodi, W. (2010):''' Reliable and accurate prediction of three-dimensional separation in asymmetric diffusers using large-eddy simulation. ''ASME J. Fluids. Engineering'', Vol. 132(3), p. 031101-1</div> | |||
#<div id="26">'''Schneider, H., von Terzi D., Bauer, H.-J. and Rodi, W. (2011a):''' Impact of secondary vortices on separation dynamics in 3d asymmetric diffusers. In Proceedings of ''Direct and Large Eddy Simulation 8'' (DLES8), 7–9 July 2010, Eindhoven, The Netherlands</div> | |||
#<div id="27">'''Schneider, H., von Terzi D., Bauer, H.-J. and Rodi, W. (2011b):''' A mechanism for control of turbulent separated flow in rectangular diffusers. ''J. Fluid Mech.'', Vol. 687, pp. 584–594</div> | |||
#<div id="28">'''Spalart, P.R., Jou, W.-H., Strelets, M. and Allmaras, S. (1997):''' Comments on the feasibility of LES for wings and on a hybrid RANS/LES approach, ''1st AFOSR Int. Conf. on DNS and LES''</div> | |||
#<div id="29">'''Spalart, P.R. (2009):''' Detached‐Eddy Simulation. ''Annu. Rev. Fluid Mech.'', Vol. 41, pp. 181–202</div> | |||
#<div id="30">'''Steiner, H., Jakirlić, S., Kadavelil, G., Šarić, S., Manceau, R. and Brenn. G. (2009):''' Report on 13<sup>th</sup> ERCOFTAC Workshop on Refined Turbulence Modelling. September 25–26, 2008, Graz University of Technology, ''ERCOFTAC Bulletin'', No. 79, pp. 24–29</div> | |||
#<div id="31">'''Stock, H.W., Leicher, S. and Seibert, W. (1988):''' Investigation of flow separation in a 3d diffuser using a coupled Euler and boundary layer method. ''Zeitschrift fuer Flugwissenschaften und Weltraumforschung'', Vol. 12(5–6), pp. 347–357</div> | |||
#<div id="32">'''Xu, D., Leschziner, M.A., Khoo, B.C., Shu, C. (1997):''' Numerical prediction of separation and reattachment of turbulent flow in an axisymmetric diffuser. ''Computers and Fluids'', Vol. 26(4), pp. 417–423</div> | |||
<br/> | <br/> | ||
---- | ---- | ||
{{ACContribs | {{ACContribs | ||
|authors=Suad | |authors=Suad Jakirlić, Gisa John-Puthenveettil | ||
|organisation=Technische Universität Darmstadt | |organisation=Technische Universität Darmstadt | ||
}} | }} |
Latest revision as of 14:40, 12 February 2017
Flow in a 3D diffuser
Confined flows
Underlying Flow Regime 4-16
References
- Abe, K. and Ohtsuka, T. (2010): An investigation of LES and Hybrid LES/RANS models for predicting 3-D diffuser flow. Int. J. Heat and Fluid Flow , Vol. 31(5), pp. 833–844
- Bradshaw, P. and Wong, F.Y.F.: The reattachment and relaxation of a turbulent shear layer. J. Fluid Mech., Vol. 52(1), pp. 113–135, 1972
- Breuer, M. (2010): A hybrid LES-URANS approach for non-equilibrium turbulent flows such as 3-D diffuser flows. 8th Int. ERCOFTAC Symp. on Engineering Turbulence Modelling and Measurements (ETMM8), Marseille, France, June 9–11
- Buice, C.U. and Eaton, J.K. (1996): Experimental investigation of flow through an asymmetric plane diffuser. CTR Annual Research Briefs, pp. 243–248
- Buice, C.U. and Eaton, J.K. (2000): Experimental investigation of flow through an asymmetric plane diffuser. ASME J. Fluids Eng., Vol. 122, pp. 433–435
- Cherry, E. M., Iaccarino, G., Elkins, C.J. and Eaton, J.K. (2006): Separated flow in a three-dimensional diffuser: preliminary validation. Center for Turbulence Research, Stanford University, Annual Research Brief 2006, pp. 31–40
- Cherry, E.M., Elkins, C.J. and Eaton, J.K. (2008): Geometric sensitivity of three-dimensional separated flows. Int. J. of Heat and Fluid Flow, Vol. 29(3), pp. 803–811
- Cherry, E.M., Elkins, C.J. and Eaton, J.K. (2009): Pressure measurements in a three-dimensional separated diffuser. Int. J. of Heat and Fluid Flow, Vol. 30(1), pp. 1–2
- Fröhlich, J. and von Terzi, D. (2008): Hybrid LES/RANS methods for the simulation of turbulent flows. Prog. Aerosp. Sci., Vol. 44, pp. 349–377
- Grundmann, S., Sayles E. L. and Eaton J. K. (2011): Sensitivity of an asymmetric 3D diffuser to plasma-actuator induced inlet condition perturbations. Experiments in Fluids, Vol. 50(1), pp. 217–231
- Grundmann, S., Sayles E. L. and Eaton J. K. (2012): Sensitivity of an asymmetric 3D diffuser to vortex-generator induced inlet condition perturbations. Experiments in Fluids, Vol. 52(1), pp. 11–21
- Gullman-Strand, J., Törnblom, O., Lindgren, B., Amberg, G. and Johansson, A.V. (2004): Numerical and experimental study of separated flow in a plane asymmetric diffuser. Int. J. Heat Fluid Flow, Vol. 25(3), pp. 451–460
- Hellsten, A. and Rautaheimo, P. (editors), (1999): Proceedings of the 8th ERCOFTAC/IAHR/COST Workshop on Refined Turbulence Modelling, 17–18 June. Helsinki University of Technology
- Jakirlić, S., Kadavelil, G., Kornhaas, M., Schäfer, M., Sternel, D.C. and Tropea, C. (2010a): Numerical and Physical Aspects in LES and Hybrid LES/RANS of Turbulent Flow Separation in a 3-D Diffuser. Int. J. Heat and Fluid Flow, Vol. 31(5), pp. 820–832
- Jakirlić, S., Kadavelil, G., Sirbubalo, E., von Terzi, D., Breuer, M. and Borello, D. (2010b): 14th ERCOFTAC SIG15 Workshop on Turbulence Modelling: Turbulent Flow Separation in a 3-D Diffuser. "Sapienza" University of Rome, September 18, 2009, ERCOFTAC Bulletin, December Issue, No. 85, pp. 5–13
- Jeyapaul, E. and Durbin, P. (2010): Turbulent separation in a three-dimensional diffuser. 8th Int. ERCOFTAC Symp. on Engineering Turbulence Modelling and Measurements (ETMM8), Marseille, France, June 9–11
- John-Puthenveettil, G. (2012): Computational modelling of complex flows using eddy-resolving turbulence models accounting for the near-wall turbulence. PhD Thesis, Technische Universitaet Darmstadt
- Maduta, R. and Jakirlić, S. (2011): An eddy-resolving Reynolds stress transport model for unsteady flow computations. 4th Symposium on Hybrid RANS-LES Methods, Beijing, China, September 28–30. In "Advances in Hybrid RANS-LES Modelling 4", 2012. Notes on Numerical Fluid Mechanics and Multidisciplinary Design, Springer ISBN 978-3-642-31817-7, Fu. S et al. (Eds.)
- Mehdizadeh, O.Z, L. Temmerman, B. Tartinville and Ch. Hirsch (2012): Applications of EARSM Turbulence Models to Internal Flows. Paper No. GT2012-68886, Proceedings of ASME Turbo Expo 2012, June 11–15, 2012, Copenhagen, Denmark
- Menter, F. and Egorov, Y. (2010): The Scale-adaptive Simulation method for unsteady turbulent flow predictions. Part 1: theory and model description. Flow, Turbulence and Combustion, Vol. 85, pp. 113–138
- Nagano, Y., Tagawa, M. and Tsuji, T. (1993): Effects of Adverse Pressure Gradient on mean Flows and Turbulent Statistics in a Boundary Layer. Turbulent Shear Flows 8, Durst et al. (editors), p. 7, Springer Verlag
- Obi, S., Aoki, K. and Masuda, S.: Experimental and computational study of turbulent separating flow in an asymmetric plane diffuser. Proc. 9th Symp. on Turbulent Shear Flows, Kyoto, Japan, August 16–19, pp. 305.1–305.5, 1993
- Ohlsson, J., Schlatter, P., Fischer P.F. and Henningson, D.S. (2009): DNS of three-dimensional separation in turbulent diffuser flows. In Advances in Turbulence XII, Proceedings of the 12th EUROMECH European Turbulence Conference, Marburg. Springer Proceedings in Physics, Vol. 132, ISBN 978-3-642-03084-0
- Ohlsson, J., Schlatter, P., Fischer P.F. and Henningson, D.S. (2010): DNS of separated flow in a three-dimensional diffuser by the spectral-element method. J. Fluid Mech., Vol. 650, pp. 307–318
- Schneider, H., von Terzi D., Bauer, H.-J. and Rodi, W. (2010): Reliable and accurate prediction of three-dimensional separation in asymmetric diffusers using large-eddy simulation. ASME J. Fluids. Engineering, Vol. 132(3), p. 031101-1
- Schneider, H., von Terzi D., Bauer, H.-J. and Rodi, W. (2011a): Impact of secondary vortices on separation dynamics in 3d asymmetric diffusers. In Proceedings of Direct and Large Eddy Simulation 8 (DLES8), 7–9 July 2010, Eindhoven, The Netherlands
- Schneider, H., von Terzi D., Bauer, H.-J. and Rodi, W. (2011b): A mechanism for control of turbulent separated flow in rectangular diffusers. J. Fluid Mech., Vol. 687, pp. 584–594
- Spalart, P.R., Jou, W.-H., Strelets, M. and Allmaras, S. (1997): Comments on the feasibility of LES for wings and on a hybrid RANS/LES approach, 1st AFOSR Int. Conf. on DNS and LES
- Spalart, P.R. (2009): Detached‐Eddy Simulation. Annu. Rev. Fluid Mech., Vol. 41, pp. 181–202
- Steiner, H., Jakirlić, S., Kadavelil, G., Šarić, S., Manceau, R. and Brenn. G. (2009): Report on 13th ERCOFTAC Workshop on Refined Turbulence Modelling. September 25–26, 2008, Graz University of Technology, ERCOFTAC Bulletin, No. 79, pp. 24–29
- Stock, H.W., Leicher, S. and Seibert, W. (1988): Investigation of flow separation in a 3d diffuser using a coupled Euler and boundary layer method. Zeitschrift fuer Flugwissenschaften und Weltraumforschung, Vol. 12(5–6), pp. 347–357
- Xu, D., Leschziner, M.A., Khoo, B.C., Shu, C. (1997): Numerical prediction of separation and reattachment of turbulent flow in an axisymmetric diffuser. Computers and Fluids, Vol. 26(4), pp. 417–423
Contributed by: Suad Jakirlić, Gisa John-Puthenveettil — Technische Universität Darmstadt
© copyright ERCOFTAC 2024