EXP 1-4 Data Quality and Accuracy: Difference between revisions
No edit summary |
|||
| (9 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
=Axisymmetric drop impact dynamics on a wall film of the same liquid= | =Axisymmetric drop impact dynamics on a wall film of the same liquid= | ||
{{ | {{EXPHeader | ||
|area=1 | |area=1 | ||
|number=4 | |number=4 | ||
| Line 7: | Line 7: | ||
__NOTOC__ | __NOTOC__ | ||
= Data Quality and Accuracy of Measurements = | = Data Quality and Accuracy of Measurements = | ||
For every set of parameters, experiments are repeated at least five | For every set of parameters, experiments are repeated at least five | ||
| Line 17: | Line 12: | ||
are verified in a post processing step, showing that the drop diameter of | are verified in a post processing step, showing that the drop diameter of | ||
1.5 mm is matched with a deviation of less than the resolution of the | 1.5 mm is matched with a deviation of less than the resolution of the | ||
camera (31 μm). Also the target velocity is set precisely | camera (31 μm). Also the target velocity is set precisely to 1.00 m/s, | ||
1.99 m/s and 3.02 m/s with a relative error of less than ±1%. Due to the | 1.99 m/s and 3.02 m/s with a relative error of less than ±1%. Due to the | ||
well-adjusted impact parameters, the formation of the corona and hence | well-adjusted impact parameters, the formation of the corona and hence | ||
the temporal development of its geometrical dimensions show great | the temporal development of its geometrical dimensions show great | ||
repeatability. The mean relative standard deviation of the parameters | repeatability. The mean relative standard deviation of the parameters | ||
''d''<sub>CB</sub>, ''d''<sub>CT</sub> and ''h''<sub>C</sub> is less than 0.45%, 1.41% and 2.23%, respectively. For | |||
the sake of clarity, average values of each data | the sake of clarity, average values of each data set are given without indicating the aforementioned standard deviation. | ||
set are given without indicating the aforementioned standard deviation. | |||
<br/> | <br/> | ||
---- | ---- | ||
{{ACContribs | {{ACContribs | ||
|authors=Bastian Stumpf | |authors=Milad Bagheri, Bastian Stumpf, Ilia V. Roisman, Cameron Tropea, Jeanette Hussong, Martin Wörner, Holger Marschall | ||
|organisation=Technical University of Darmstadt and Karlsruhe Institute of Technology | |organisation=Technical University of Darmstadt and Karlsruhe Institute of Technology | ||
}} | }} | ||
{{ | {{EXPHeader | ||
|area=1 | |area=1 | ||
|number=4 | |number=4 | ||
Latest revision as of 10:01, 17 August 2023
Axisymmetric drop impact dynamics on a wall film of the same liquid
Data Quality and Accuracy of Measurements
For every set of parameters, experiments are repeated at least five times to minimize the effect of random errors. The impact parameters are verified in a post processing step, showing that the drop diameter of 1.5 mm is matched with a deviation of less than the resolution of the camera (31 μm). Also the target velocity is set precisely to 1.00 m/s, 1.99 m/s and 3.02 m/s with a relative error of less than ±1%. Due to the well-adjusted impact parameters, the formation of the corona and hence the temporal development of its geometrical dimensions show great repeatability. The mean relative standard deviation of the parameters dCB, dCT and hC is less than 0.45%, 1.41% and 2.23%, respectively. For the sake of clarity, average values of each data set are given without indicating the aforementioned standard deviation.
Contributed by: Milad Bagheri, Bastian Stumpf, Ilia V. Roisman, Cameron Tropea, Jeanette Hussong, Martin Wörner, Holger Marschall — Technical University of Darmstadt and Karlsruhe Institute of Technology
© copyright ERCOFTAC 2024