EXP 1-4 Introduction

Axisymmetric drop impact dynamics on a wall film of the same liquid

Front Page

Introduction

Review of experimental studies

Description

Experimental Set Up

Measurement Quantities and Techniques

Data Quality and Accuracy

Measurement Data and Results

Introduction

Droplet impact onto wetted surfaces is of pertinence to many technical applications such as internal combustion engines, icing on plane wings and spray coating technologies to name a few. Immediately after the impact, the droplet expands radially along the surface. If the impact kinetic energy is sufficiently high, an upward growing crown is generated with detachment of secondary droplets. For the cases considered here, splashing is absent and the drop-film interaction is axisymmetric. The two-phase flow is laminar and its dynamics is governed by an interplay between inertial, viscous and capillary forces. The characteristics of the flow are illustrated in Fig. 2 showing results of accompanying axisymmetric numerical simulations. As main quantities of interest, the experiment provides data for the time evolution of three characteristic dimensions of the crown forming during the drop-film interaction.

Fig. 2: Visualization of computed phase distribution and velocity field for moderate impact velocity.

---

Contributed by: Milad Bagheri, Bastian Stumpf, Ilia V. Roisman, Cameron Tropea, Jeanette Hussong, Martin Wörner, Holger Marschall — Technical University of Darmstadt and Karlsruhe Institute of Technology

Front Page

Introduction

Review of experimental studies

Description

Experimental Set Up

Measurement Quantities and Techniques

Data Quality and Accuracy

Measurement Data and Results

© copyright ERCOFTAC 2024