EXP 1-4 Review of Studies: Difference between revisions
No edit summary |
|||
| Line 10: | Line 10: | ||
Provide a brief review of past experimental studies of this test case . Identify your chosen study and state the test case underlying the study, giving reasons for its choice ( e.g. a well-constructed test case, allowing good quality control and accurate measurements, of scientific and/or practical interest and as test case for CFD studies). Indicate whether or not the experiments have been designed for the purpose of CFD validation (desirable but not mandatory). | Provide a brief review of past experimental studies of this test case . Identify your chosen study and state the test case underlying the study, giving reasons for its choice ( e.g. a well-constructed test case, allowing good quality control and accurate measurements, of scientific and/or practical interest and as test case for CFD studies). Indicate whether or not the experiments have been designed for the purpose of CFD validation (desirable but not mandatory). | ||
</pre> | </pre> | ||
Comprehensive reviews on the drop impact onto a solid substrates wetted by a thin film can be found in Yarin (2006), Liang & Muddawar (2016) and Yarin, Roisman & Tropea (2017). | |||
A review of experimental studies on mass and momentum interactions during drop impact on a liquid film is provided by Liang & Mudawar (2016) while an overview on important experimental studies and findings since then can be found in Stumpf et al. (2023). Experiments on the dynamics of the droplet-wall-film interaction in the event that the entire impact process is rotational symmetrical are lacking so far. Such data are highly relevant for the development of simulation methods, since the numerical effort of axisymmetric computations remains limited compared to 3D calculations and extensive comparative studies can be carried out for validation and methodical developments. The present experiment provides such data and has been especially designed for the validation of CFD methods for numerical simulation of two-phase flows where the gas-liquid interface is well resolved. | A review of experimental studies on mass and momentum interactions during drop impact on a liquid film is provided by Liang & Mudawar (2016) while an overview on important experimental studies and findings since then can be found in Stumpf et al. (2023). Experiments on the dynamics of the droplet-wall-film interaction in the event that the entire impact process is rotational symmetrical are lacking so far. Such data are highly relevant for the development of simulation methods, since the numerical effort of axisymmetric computations remains limited compared to 3D calculations and extensive comparative studies can be carried out for validation and methodical developments. The present experiment provides such data and has been especially designed for the validation of CFD methods for numerical simulation of two-phase flows where the gas-liquid interface is well resolved. | ||
A.L. Yarin, Drop impact dynamics: Splashing, spreading, receding, bouncing... Annu. Rev. Fluid Mech., 38 (2006) 159-192, https://doi.org/10.1146/annurev.fluid.38.050304.092144 | |||
G. Liang, I. Mudawar, Review of mass and momentum interactions during drop impact on a liquid film, Int. J. Heat Mass Transf., 101 (2016) 577-599, https://doi.org/10.1016/j.ijheatmasstransfer.2016.05.062 | G. Liang, I. Mudawar, Review of mass and momentum interactions during drop impact on a liquid film, Int. J. Heat Mass Transf., 101 (2016) 577-599, https://doi.org/10.1016/j.ijheatmasstransfer.2016.05.062 | ||
A.L. Yarin, I.V. Roisman, C. Tropea, Collision phenomena in liquids and solids, Cambridge University Press, Cambridge, United Kingdom, 2017, https://doi.org/10.1017/9781316556580 | |||
<br/> | <br/> | ||
Revision as of 07:15, 4 July 2023
Axisymmetric drop impact dynamics on a wall film of the same liquid
Review of Experimental Studies and choice of test case
Provide a brief review of past experimental studies of this test case . Identify your chosen study and state the test case underlying the study, giving reasons for its choice ( e.g. a well-constructed test case, allowing good quality control and accurate measurements, of scientific and/or practical interest and as test case for CFD studies). Indicate whether or not the experiments have been designed for the purpose of CFD validation (desirable but not mandatory).
Comprehensive reviews on the drop impact onto a solid substrates wetted by a thin film can be found in Yarin (2006), Liang & Muddawar (2016) and Yarin, Roisman & Tropea (2017).
A review of experimental studies on mass and momentum interactions during drop impact on a liquid film is provided by Liang & Mudawar (2016) while an overview on important experimental studies and findings since then can be found in Stumpf et al. (2023). Experiments on the dynamics of the droplet-wall-film interaction in the event that the entire impact process is rotational symmetrical are lacking so far. Such data are highly relevant for the development of simulation methods, since the numerical effort of axisymmetric computations remains limited compared to 3D calculations and extensive comparative studies can be carried out for validation and methodical developments. The present experiment provides such data and has been especially designed for the validation of CFD methods for numerical simulation of two-phase flows where the gas-liquid interface is well resolved.
A.L. Yarin, Drop impact dynamics: Splashing, spreading, receding, bouncing... Annu. Rev. Fluid Mech., 38 (2006) 159-192, https://doi.org/10.1146/annurev.fluid.38.050304.092144
G. Liang, I. Mudawar, Review of mass and momentum interactions during drop impact on a liquid film, Int. J. Heat Mass Transf., 101 (2016) 577-599, https://doi.org/10.1016/j.ijheatmasstransfer.2016.05.062
A.L. Yarin, I.V. Roisman, C. Tropea, Collision phenomena in liquids and solids, Cambridge University Press, Cambridge, United Kingdom, 2017, https://doi.org/10.1017/9781316556580
Contributed by: Milad Bagheri, Bastian Stumpf, Ilia V. Roisman, Cameron Tropea, Jeanette Hussong, Martin Wörner, Holger Marschall — Technical University of Darmstadt and Karlsruhe Institute of Technology
© copyright ERCOFTAC 2024