DNS 1-6 Statistical Data

Front Page

Description

Computational Details

Quantification of Resolution

Statistical Data

Instantaneous Data

Storage Format

Statistical data

In this section the relevant statistical data for the flow around the wing-body junction computed with MIGALE is given. The reported data is the one mentioned in Table 1 of the list of desirable quantities (PDF).

The data is available as:

• In .vtu (ASCII) format for statistical data.
• In .csv (text) format as vertical profiles at various locations.

Volume data

Volumetric data of the statistics are provided here. For more information regarding the stored quantities and the storage format, please refer to the storage format guidelines.

The available files are:

• averaged pressure (59.4 GB).
• averaged velocity x (64.4 GB).
• averaged velocity y (67.8 GB).
• averaged velocity z (67.2 GB).
• Reynolds stress xx (67.7 GB).
• Reynolds stress yx (68.7 GB).
• Reynolds stress yy (68.3 GB).
• Reynolds stress zx (68.7 GB).
• Reynolds stress zy (69.4 GB).
• Reynolds stress zz (67.7 GB).
• Taylor microscale (67.2 GB).
• Kolmogorov length scale (67.1 GB).
• Kolmogorov time scale (67.4 GB).

Surface data

Surface data of the statistics are provided here. For more information regarding the stored quantities and the storage format, please refer to the storage format guidelines.

The available files are:

• averaged pressure (bottom solid wall) (277.6 MB).
• averaged pressure (wing solid wall) (19.2 MB).

The pressure coefficient contour on the bottom surface is reported in Fig. 13. Due to the problem geomertry, a favourable pressure gradient is generated in front of the wing profile resulting in a reduction of $C_{p}$ (blue area). This reduction attenuates moving away from the airfoil, but it is still appreciable along the lateral boundaries, i.e., $\max {(C_{p,lateral})}=-0.15$. Accordingly, although small, a blockage effect on the flow due to the lateral boundaries is obtained. As expected for a flow in the incompressible regime (here $Ma=0.078$), the maximum value of $C_{p}$ is close to 1.

Fig. 14 shows the time averaged averaged dimensionless wall shear stress above the flat plate. The aforementioned favourable pressure gradient in front of the airfoil induces a flow acceleration, which is the main cause of the increase of the wall shear stress. Downstream the wing profile, in the wake region, a "double tail" behaviour of the displayed quantity is clearly visible and is generated by the presence of the horseshoe vortex. This becomes evident extracting streamlines at selected planes, see Fig. 15.

Figure 13: Wing-body junction. Contour of pressure coefficient on the bottom surface for $-3<x/T<10$

Figure 14: Wing-body junction. Contour of averaged dimensionless wall shear stress on the bottom surface for $-12.75<x/T<10$

Figure 15: Wing-body junction. Streamlines at selected planes, i.e., symmetry plane and cross section planes at $x/T=0.75$ and $x/T=4.46$, superimposed on contour of averaged dimensionless wall shear stress

Profile data

Profile data have been extracted from the symmetry plane $z/T=0$ at different streamwise locations ($x/T=-0.45,-0.40,-0.35,-0.30,-0.25,-0.20,-0.15,-0.10,-0.05,-0.01$) and made dimensionless with respect to reference quantities ($u_{ref}$, $\rho _{ref}$). The data stored in each file are:

• vertical location $y/T$
• average velocity components $U_{i}/u_{ref}$
• Reynolds stress components $R_{ij}/(\rho _{ref}u_{ref}^{2})$
• turbulent kinetic energy $k/u_{ref}^{2}$

Profiles at selected streamwise locations are reported in Fig. 16.

profile_midplane_-0.45.csv

profile_midplane_-0.40.csv

profile_midplane_-0.35.csv

profile_midplane_-0.30.csv

profile_midplane_-0.25.csv

profile_midplane_-0.20.csv

profile_midplane_-0.15.csv

profile_midplane_-0.10.csv

profile_midplane_-0.05.csv

profile_midplane_-0.01.csv

Table 4: Wing-body junction. Profiles on symmetry plane at different streamwise locations

Figure 16: Wing-body junction. Profiles at symmetry plane at different stremwise locations

Contour data

Contour data of the averaged velocity components $U$ and $V$, the three normal stresses $R_{xx}$, $R_{yy}$ and $R_{zz}$, the turbulent kinetic energy $k$, and the shear stress $R_{xy}$ in the symmetry plane are provided in Fig. 17. As the region depicted is in front of the leading edge, it is visible the effect of the horse-shoe vortex: while the streamwise component of the velocity becomes negative above the horizontal solid wall, the normalwise one presents a large negative region close to the leading edge. This results in a clockwise rotating vortex. Within this vortex the Reynolds stresses as well as the turbulent kinetic energy show the maximum intensity. Moreover, looking more in detail, it is possible to notice the presence of a tiny vortex in anticlockwise rotation clinging to the leading edge of the wing, near the wing-body junction. All contours are normalized with respect to the reference quantities.

Figure 17: Wing-body junction. Contours of average velocity compoents, Reynolds normal stresses, turbulent kinetic energy and Reynolds shear stress at symmetry plane

---

Contributed by: Francesco Bassi (UNIBG), Alessandro Colombo (UNIBG), Francesco Carlo Massa (UNIBG), Michael Leschziner (ICL/ERCOFTAC), Jean-Baptiste Chapelier (ONERA) — University of Bergamo (UNIBG), ICL (Imperial College London), ONERA

Front Page

Description

Computational Details

Quantification of Resolution

Statistical Data

Instantaneous Data

Storage Format

© copyright ERCOFTAC 2024