DNS 1-2 Computational Details: Difference between revisions
| Line 17: | Line 17: | ||
== Spatial and temporal resolution, grids == | == Spatial and temporal resolution, grids == | ||
The domain is discretised into <math>62\times29\times60</math> hexahedral elements. For a polynomial order of 5, this yields 174 solution points in the transverse direction and about <math>23\times10^6</math> in total. The grid is uniform in the spanwise and streamwise directions, but clustered near the walls in transverse direction. | The domain is discretised into <math>62\times29\times60</math> hexahedral elements. For a polynomial order of 5, this yields 174 solution points in the transverse direction and about <math>23\times10^6</math> in total. The grid is uniform in the spanwise and streamwise directions, but clustered near the walls in transverse direction.Iyer et al. (2019) observed that the grid resolution and polynomial order used in these calculations are sufficient enough to guarantee mesh independence of velocity statistics. | ||
An explicit RK45 scheme is used to advance the solution in time. The order of accuracy of the solution changes as a function of time, as discussed in [https://www.sciencedirect.com/science/article/pii/S0010465514002549#s000065 Witherden et al. (2014)]. The grid used for the simulations is available on the [http://kbwiki-data.s3-eu-west-2.amazonaws.com/DNS-1/2/Channel_180/Channel-180.pyfrm ERCOFTAC database]. | An explicit RK45 scheme is used to advance the solution in time. The order of accuracy of the solution changes as a function of time, as discussed in [https://www.sciencedirect.com/science/article/pii/S0010465514002549#s000065 Witherden et al. (2014)]. The grid used for the simulations is available on the [http://kbwiki-data.s3-eu-west-2.amazonaws.com/DNS-1/2/Channel_180/Channel-180.pyfrm ERCOFTAC database]. | ||
Revision as of 09:18, 6 October 2021
Computational Details
Computational approach
The computations are performed using PyFR version 1.12.0, a python based framework for solving advection-diffusion type problems using the Flux Reconstruction approach of Huynh. The details of the numerical approach are available here.
Spatial and temporal resolution, grids
The domain is discretised into hexahedral elements. For a polynomial order of 5, this yields 174 solution points in the transverse direction and about in total. The grid is uniform in the spanwise and streamwise directions, but clustered near the walls in transverse direction.Iyer et al. (2019) observed that the grid resolution and polynomial order used in these calculations are sufficient enough to guarantee mesh independence of velocity statistics.
An explicit RK45 scheme is used to advance the solution in time. The order of accuracy of the solution changes as a function of time, as discussed in Witherden et al. (2014). The grid used for the simulations is available on the ERCOFTAC database.
Computation of statistical quantities
PyFR computes volumetric time average quantities by accumulating averages every 50 time steps over a prescribed time period, which is 100 time units for the channel flow simulations. The average calculation is started after 3000 convective time unit in windowed mode. The outputs from the different averaging windows are then combined together.
In the case of channel flow, averages are further reduced to one-dimensional data by spatial averaging in the homogeneous streamwise and spanwise directions.
Contributed by: Arun Soman Pillai, Lionel Agostini — Imperial College London
© copyright ERCOFTAC 2024