DNS 1-3: Difference between revisions

From KBwiki
Jump to navigation Jump to search
No edit summary
No edit summary
 
(14 intermediate revisions by 2 users not shown)
Line 1: Line 1:


=Flow in a 3D diffuser=
=Flow in a 3D diffuser=
{{DNSHeaderLib
{{DNSHeader
|area=1
|area=1
|number=3
|number=3
Line 7: Line 7:
__NOTOC__
__NOTOC__
= Abstract =
= Abstract =
The 3D (Stanford) Diffuser is identified as a case with complex internal corner flow and 3D separation, is well documented and has a relatively simple geometry. The diffuser has an inlet section, an expansion section and an outlet section (see Figure 1). The flow at the inlet is assumed to be fully developed. At the outlet, standard Dirichlet condition for the pressure is prescribed, a Reynolds number of 10000 will be considered.
The 3D (Stanford) Diffuser is identified as a case with complex internal corner flow and 3D separation, is well documented (see, e.g., [[UFR_4-16_Test_Case]]) and has a relatively simple geometry. The diffuser has an inlet section, an expansion section and an outlet section (see Figure 1). The flow at the inlet is assumed to be a fully developed rectangular channel flow. At the outlet, standard Dirichlet condition for the pressure is prescribed. An inflow Reynolds number of 10000 is considered based on the duct height and bulk velocity. The flow is considered to be incompressible.


The results of this project will be used to assess computational strategies
This test case concerns a highly resolved Direct Numerical Simulation (DNS) using the in-house Finite Element Method (FEM) code Alya developed at BSC. The parallel multi-physics code Alya has been designed for large-scale parallel applications and uses a non-incremental fractional-step method to stabilize pressure, with an explicit fourth-order Runge-Kutta time integration scheme. The final scheme preserves momentum, angular momentum and kinetic energy at the discrete level.
(compressible vs incompressible DNS) and provide a rich database for verification and validation on subsequent computational campaigns.
 
<!--{{Demo_UFR_Guidance}}-->
The primary objective of this contribution is to provide a rich database of flow and turbulence statistics for verification and validation on subsequent computational campaigns. The provided statistical quantities in the database are:
<br/>
*mean pressure and velocities;
----
*Reynolds stress components;
{{ACContribs
*pressure autocorrelation;
|authors= Oriol Lehmkuhl, Arnau Miro
*Taylor microscale;
|organisation= Barcelona Supercomputing Center (BSC)
*Kolmogorov length and time scales;
}}
 
{{DNSHeaderLib
The following quantities are provided for the inlet duct section only:
|area=1
*Reynolds stress equations budget terms;
|number=3
*triple velocity correlation;
}}
*pressure-velocity correlation.
 
<div id="figure1"></div>
{|align="center" width=750
|[[Image:DNS_1_3_fig1.png|740px]]
|-
|'''Figure 1:''' Stanford double diffuser, Re=10000. Non-dimensional instantaneous velocity at the vertical middle plane (top) and horizontal plane at y=0.5 (bottom) using Alya with 250 Million DoF and P2 polynomials.
|}




© copyright ERCOFTAC {{CURRENTYEAR}}
© copyright ERCOFTAC {{CURRENTYEAR}}

Latest revision as of 09:16, 5 January 2023

Flow in a 3D diffuser

Front Page

Description

Computational Details

Quantification of Resolution

Statistical Data

Instantaneous Data

Storage Format

Abstract

The 3D (Stanford) Diffuser is identified as a case with complex internal corner flow and 3D separation, is well documented (see, e.g., UFR_4-16_Test_Case) and has a relatively simple geometry. The diffuser has an inlet section, an expansion section and an outlet section (see Figure 1). The flow at the inlet is assumed to be a fully developed rectangular channel flow. At the outlet, standard Dirichlet condition for the pressure is prescribed. An inflow Reynolds number of 10000 is considered based on the duct height and bulk velocity. The flow is considered to be incompressible.

This test case concerns a highly resolved Direct Numerical Simulation (DNS) using the in-house Finite Element Method (FEM) code Alya developed at BSC. The parallel multi-physics code Alya has been designed for large-scale parallel applications and uses a non-incremental fractional-step method to stabilize pressure, with an explicit fourth-order Runge-Kutta time integration scheme. The final scheme preserves momentum, angular momentum and kinetic energy at the discrete level.

The primary objective of this contribution is to provide a rich database of flow and turbulence statistics for verification and validation on subsequent computational campaigns. The provided statistical quantities in the database are:

  • mean pressure and velocities;
  • Reynolds stress components;
  • pressure autocorrelation;
  • Taylor microscale;
  • Kolmogorov length and time scales;

The following quantities are provided for the inlet duct section only:

  • Reynolds stress equations budget terms;
  • triple velocity correlation;
  • pressure-velocity correlation.
DNS 1 3 fig1.png
Figure 1: Stanford double diffuser, Re=10000. Non-dimensional instantaneous velocity at the vertical middle plane (top) and horizontal plane at y=0.5 (bottom) using Alya with 250 Million DoF and P2 polynomials.


© copyright ERCOFTAC 2024