Best Practice Advice AC1-01: Difference between revisions

From KBwiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 15: Line 15:




[[Image:d34_image004.gif]]   (Figure dimensions in inches)
[[Image:d34_image004.gif]]     (Figure dimensions in inches)
                                
                                
                              •         
                                •         
                                
                                
                              •        M219 Transonic Cavity
                                •        M219 Transonic Cavity
                              
                              
                              •        M∞ = 0.85
                                •        M∞ = 0.85
                                
                                
                              •        L/D (length/depth ratio) = 5
                                •        L/D (length/depth ratio) = 5





Revision as of 15:25, 1 September 2008

Aero-acoustic cavity

Application Challenge 1-01 © copyright ERCOFTAC 2004


Best Practice Advice for the AC

Key Fluid Physics

D34 image002.gif

Description of Application Challenge


D34 image004.gif (Figure dimensions in inches)

                               •         
                             
                               •        M219 Transonic Cavity
                            
                               •        M∞ = 0.85
                             
                               •        L/D (length/depth ratio) = 5



• W/D (width/depth ratio) = 1

• ReL = 6.84x106


DOAPs

On 10 points along cavity ceiling;

• RMS pressures

• Power Spectral Density (PSD) or Sound Pressure Level (SPL)

Flow Physics

• Sharp edge separation

• Cavity flow recirculation

• Shear layer oscillation. The DOAPs are driven by the shear layer oscillation, therefore it is important to resolve this feature well.

• Large eddy structures

• Coherent (vortex shedding) and broadband (turbulent) structures

Underlying Flow Regimes

• Cavity Flow

• 2D Unsteady Shear Layer

Neither of these are in the Knowledge Base. © ERCOFTAC 2004 Application Uncertainties

• Upstream turbulence level

• Boundary layer ahead of cavity leading edge – not known whether the boundary layer is tripped or not. © ERCOFTAC 2004 Computational Domain and Boundary Conditions

Computational Domain

• Upstream domain starts at rig sharp leading edge, downstream one cavity length behind cavity trailing edge.

• Side domains one cavity width away from side edge.

Boundary Conditions

• M=0.85, T=305.06K on upstream boundary

• Side boundaries, top boundary and downstream boundary, constant pressure = 62059.14Pa

• No slip conditions on cavity walls, with hybrid low-Re / wall-function © ERCOFTAC 2004 Discretisation and Grid Resolution

• Second-order special discretisation (MARS) on momentum

• Hexahedral orthogonal meshes with successive 2x2 refinement into the shear layer and walls are necessary. Mesh dependency analysis shows low sensitivity to refiments greater than 40000 cells in the 2D plane.

• Better than 1st order temporal discretsation © ERCOFTAC 2004 Physical Modelling

• Transient

• Compressible ideal gas

• Low-Reynolds number k-epsilon (linear and non-liners) turbulence models © ERCOFTAC 2004 Recommendations for Future Work

• Extension to 3D

• LES-based turbulence modeling

• Full second-order central differencing special discretisation in the LES flow regions

Both these recommendations have been followed in later studies reported by the Application Challenge Author – see additional reference section below [1,3]. © ERCOFTAC 2004 Additional References

[1] Mendonca, F., Allen, R., de Charentenay, J. and Kirkham, D., “CFD Prediction of narrowband and broadband cavity acoustics at M=0.85”, AIAA-2003-3303, 9th AIAA/CEAS Aeroacoustics Conference and Exhibit, Hilton Head, South Carolina, USA, May 2003.

[2] Allen, R., and Mendonça, F., “DES Predictions on the M219 cavity at M=0.85”, Colloquium EUROMECH 449, Chamonix, France, 7-8th December 2003

[3] Allen, R., and Mendonça, F., “DES Validations of Cavity Acoustics over the subsonic to Supersonic Range”, AIAA-2004-2862, 10th AIAA/CEAS Aeroacoustics Conference and Exhibit, Manchester, UK, May 2004 © copyright ERCOFTAC 2004

Contributors: Fred Mendonca; Richard Allen - Computational Dynamics Ltd

Site Design and Implementation: Atkins and UniS

       Top        	      Next