Test Data AC2-09: Difference between revisions
Line 38: | Line 38: | ||
The pilot flame bulk velocity ''U<sub>pilot</sub>'' = 11.4 m/s | The pilot flame bulk velocity ''U<sub>pilot</sub>'' = 11.4 m/s | ||
and the coflow velocity ''U<sub>cfl</sub>'' = 0.9 m/s. | and the coflow velocity ''U<sub>cfl</sub>'' = 0.9 m/s. | ||
{|border="1" align="center" | |||
[[Image:AC2-09_fig3a.gif|300px]][[Image:AC2-09_fig3b.gif|300px]] | [[Image:AC2-09_fig3a.gif|300px]]||[[Image:AC2-09_fig3b.gif|300px]] | ||
|} | |||
===Measurement Errors=== | ===Measurement Errors=== |
Revision as of 10:14, 29 April 2011
SANDIA Flame D
Application Challenge AC2-09 © copyright ERCOFTAC 2024
Overview of Tests
The velocity measurements were performed with two-component fiber-optic laser Doppler anemometer (Dantec). All the details of the flow field measuring techniques applied in Sandia Flame D experiment are explained in[1]. Measured scalars for Sandia D Flame include temperature, mixture fraction, N2, O2, H2O, H2, CH4, CO, CO2, OH and NO. Experimental methods and measurement uncertainties are outlined in[1] Spontaneous Raman scattering of the beams from two Nd:YAG lasers (532 nm) was used to measure concentrations of the major species. The Rayleigh scattering signal was converted to temperature using a species-weighted scattering cross section, based on the Raman measurements. Linear laser-induced fluorescence (LIF) was used to measure OH and NO, and the fluorescence signals were corrected on a shot-to-shot basis for variations in Boltzmann fraction and collisional quenching rate. The concentration of CO was measured by Raman scattering and by two-photon laser-induced fluorescence (TPLIF).
TEST CASE
Description of Experiment
The Application Challenge includes just one test case, Sandia Flame D with defined Reynolds number of the fuel jet and the fuel and pilot flame compositions as given in Table EXP-A.
Boundary Data
The inlet mean and fluctuating velocity at the distance x/D=1 from the burner are shown in Fig.3. The inlet parabolic profile had a maximum at the centre of the fuel nozzle of Umax = 62 m/s. The pilot flame bulk velocity Upilot = 11.4 m/s and the coflow velocity Ucfl = 0.9 m/s.
![AC2-09 fig3a.gif](https://kbwiki-images.s3.amazonaws.com/thumb/8/82/AC2-09_fig3a.gif/300px-AC2-09_fig3a.gif)
![AC2-09 fig3b.gif](https://kbwiki-images.s3.amazonaws.com/thumb/8/87/AC2-09_fig3b.gif/300px-AC2-09_fig3b.gif)
Measurement Errors
The flow field measurement statistical errors are estimated in[1] as below 5% for the mean velocities and within 10% for fluctuating components. The scalar measurement errors are estimated and analyzed in[2]. The relative uncertainty (not including statistical noise or potential effects of spatial averaging) is estimated to be within 2% for the Raman measurements, 5% for OH, 5% for CO, and 10% for NO.
Measured Data
References
Contributed by: Andrzej Boguslawski — Technical University of Częstochowa
© copyright ERCOFTAC 2024