UFR 2-13 Best Practice Advice: Difference between revisions

From KBwiki
Jump to navigation Jump to search
 
(22 intermediate revisions by 3 users not shown)
Line 1: Line 1:
=Fluid-structure interaction in turbulent flow past cylinder/plate configuration  I (First swiveling mode)=
{{UFRHeader
{{UFRHeader
|area=2
|area=2
Line 4: Line 5:
}}
}}
__TOC__
__TOC__
== Flows Around Bodies ==
=== Underlying Flow Regime 2-13 ===


= Best Practice Advice =
= Best Practice Advice =
<!-- {{Demo_UFR_BPA}} -->
<!-- {{Demo_UFR_BPA}} -->
== Key Physics ==
== Key Physics ==


Line 32: Line 37:
cylinder. Transition to turbulence means that from that point onwards
cylinder. Transition to turbulence means that from that point onwards
the flow is three-dimensional, chaotic and consists of a variety
the flow is three-dimensional, chaotic and consists of a variety
of different length and time scales. The low-frequency components of
of different length and time scales. The rubber plate acts like
a splitter plate behind the cylinder. However, for the length of the
flexible splitter plate considered in the present study and the
Reynolds number investigated, vortex shedding past the cylinder
is not suppressed. Thus the low-frequency components of
the turbulent flow dominate the coupled FSI problem, whereas the
the turbulent flow dominate the coupled FSI problem, whereas the
high-frequency contributions are visible in the fluid forces but are
high-frequency contributions are visible in the fluid forces but are
Line 38: Line 47:
signals for the deflections show the quasi-periodic signals without
signals for the deflections show the quasi-periodic signals without
high-frequency fluctuations.
high-frequency fluctuations.


== Numerical Modeling ==
== Numerical Modeling ==
Line 45: Line 55:
* '''Discretization accuracy''': In order to perform LES predictions it is required that spatial and temporal discretization are both at least of second-order accuracy. It is also important that the numerical schemes applied possesses low numerical diffusion (and dispersion) properties in order to resolve all the scales and not to dampen them out. A predictor-corrector scheme (projection method) of second-order accuracy forms the kernel of the fluid solver. In the predictor step an explicit Runge-Kutta scheme advances the momentum equation in time. This explicit method is chosen because of its accuracy, speed and low memory consumption. The discretization in space is done with second order central discretization scheme without any flux blending.
* '''Discretization accuracy''': In order to perform LES predictions it is required that spatial and temporal discretization are both at least of second-order accuracy. It is also important that the numerical schemes applied possesses low numerical diffusion (and dispersion) properties in order to resolve all the scales and not to dampen them out. A predictor-corrector scheme (projection method) of second-order accuracy forms the kernel of the fluid solver. In the predictor step an explicit Runge-Kutta scheme advances the momentum equation in time. This explicit method is chosen because of its accuracy, speed and low memory consumption. The discretization in space is done with second order central discretization scheme without any flux blending.


* '''Grid resolution''': The second critical issue to perform LES is the grid resolution. The mesh near the wall, in the free-shear layers and also in the interior flow domain has to be fine enough. For wall-resolved LES the recommendations given by Piomelli and Chasnov (1996) should be followed or outperformed, e.g., <math>y^+ < 2,  \; \Delta x^+ > 50, \;  \Delta z^+ < 50-150</math>. In the present investigation two different block-structured grids either for the subset and for the full case are used. In the first case the entire grid consists of about 13.5 million control volumes (CVs). For the full geometry the grid possesses about 22.5 million CVs. The first cell center is positioned at a distance of <math>\Delta</math>y/D=1.7 x 10<math>^{-2}</math>. For both setups it was found to be sufficient to resolve the flow accurately at walls as well as in the internal flow domain. Similar to the classical flow around a cylinder also in the present configuration it is important to resolve the region close to the separation point and the evolving shear layer region adequately.
* '''Grid resolution''': The second critical issue to perform LES is the grid resolution. The mesh near the wall, in the free-shear layers and also in the interior flow domain has to be fine enough. For wall-resolved LES the recommendations given by Piomelli and Chasnov (1996) should be followed or outperformed, e.g., <math>y^+ < 2,  \; \Delta x^+ < 50, \;  \Delta z^+ < 50-150</math>. In the present investigation two different block-structured grids either for the subset and for the full case are used. In the first case the entire grid consists of about 13.5 million control volumes (CVs). For the full geometry the grid possesses about 22.5 million CVs. The first cell center is positioned at a distance of <math>\Delta</math>z/D=1.7 x 10<math>^{-2}</math>. For both setups it was found to be sufficient to resolve the flow accurately at walls as well as in the free shear layers. Similar to the classical flow around a cylinder also in the present configuration it is important to resolve the region close to the separation point and the evolving shear layer region adequately.


* '''Grid quality''': The third point is the quality of the grid. Smoothness and orthogonality is a very important issue for LES computations. In order to capture separations and reattachments at the cylinder and on the plate reliably, the orthogonality of the curvilinear grid in the vicinity of the walls has to be high.
* '''Grid quality''': The third point is the quality of the grid. Smoothness and orthogonality is a very important issue for LES computations. In order to capture separations and reattachments at the cylinder and on the plate reliably, the orthogonality of the curvilinear grid in the vicinity of the walls has to be high. For deforming grids such as in the present FSI case, it is furthermore crucial to keep a high quality grid after strong grid movements and deformations.  


* '''Inlet boundary condition''': At the inlet a constant streamwise velocity is set as inflow condition without adding any perturbations. The choice of zero turbulence level is based on the consideration that such small perturbations imposed at the inlet will generally not reach the cylinder due to the coarseness of the grid at the outer boundaries. Therefore, all inflow fluctuations will be highly damped. However, since the flow is assumed to be sub-critical, this disregard is insignificant.
* '''Inlet boundary condition''': At the inlet a constant streamwise velocity is set as inflow condition without adding any perturbations. The choice of zero turbulence level is based on the consideration that ,in general, small perturbations imposed at the inlet will anyway not reach the cylinder due to the coarseness of the grid at the outer boundaries. Therefore, all inflow fluctuations will be highly damped. However, since the flow is assumed to be sub-critical and the inflow turbulence level measured in the experimental setup found to be rather small, the neglect of inflow perturbations is of no relevance.


* '''Outlet boundary condition''': A convective outflow boundary condition is favored allowing vortices to leave the integration domain without significant disturbances (Breuer, 2002). The convection velocity is set to <math>u_\text{inflow}</math>.
* '''Outlet boundary condition''': A convective outflow boundary condition is favored allowing vortices to leave the integration domain without significant disturbances (Breuer, 2002). The convection velocity is set to <math>u_\text{inflow}</math>.


* '''Boundary conditions at the lateral sides''': In the subset case a reasonable approximation already applied in Breuer et al. (2012) is to use periodic boundary conditions in spanwise direction for both disciplines. For LES predictions periodic boundary conditions represent an often used measure in order to avoid the formulation of appropriate inflow and outflow boundary conditions. The approximation is valid as long as the turbulent flow is homogeneous in the specific direction and the width of the domain is sufficiently large. The latter can be proven by predicting two-point correlations, which have to drop towards zero within the half-width of the domain. The impact of periodic boundary conditions on the CSD predictions are discussed below. For the full case periodic boundary conditions can no longer be used. Instead, the lateral boundaries are assumed as slip walls (similar to the upper and lower walls) since the full resolution of the boundary layers would be again too costly. Furthermore, the assumption of the slip wall is consistent with the disregard of the small gap between the flexible structure and the side walls.
* '''Boundary conditions at the lateral sides''': In the subset case a reasonable approximation already applied in Breuer et al. (2012) is to use periodic boundary conditions in spanwise direction for both the fluid and the structure. For LES predictions periodic boundary conditions represent an often used measure in order to avoid the formulation of appropriate inflow and outflow boundary conditions. The approximation is valid as long as the turbulent flow is homogeneous in the specific direction and the width of the domain is sufficiently large. The latter can be proven by predicting two-point correlations, which have to drop towards zero within the half-width of the domain. The impact of periodic boundary conditions on the CSD predictions are discussed below. For the full case periodic boundary conditions can no longer be used. Instead, the lateral boundaries are assumed as slip walls (similar to the upper and lower walls) since the full resolution of the boundary layers would be again too costly. Furthermore, the assumption of the slip wall is consistent with the disregard of the small gap between the flexible structure and the side walls.


=== CSD ===
=== CSD ===


* '''Grid resolution''': In the present investigation shell elements were used. A grid study on a simple structure case has shown that a mesh with <math>10 \times 10</math> shell elements for the subset case and with <math>10 \times 30</math> shell elements for the full case were sufficient.
* '''Grid resolution''': In the present investigation shell elements were used. A grid study on a simple structure case has shown that a mesh with <math>10 \times 10</math> shell elements for the subset case and with <math>10 \times 30</math> shell elements for the full case was sufficient.


* '''Non-linear deformation''': In the present test case the deformations of the flexible structure are moderate. However, in the realized computations possible geometrical non-linearities are taken into account with the CSD solver Carat++.  
* '''Non-linear deformation''': In the present test case the deformations of the flexible structure are moderate. However, in the realized computations possible geometrical non-linearities are taken into account with the CSD solver Carat++.  
Line 65: Line 75:
* '''Boundary conditions at the cylinder''': At the rigid cylinder a clamped support is realized and all degrees of freedom are equal to zero.
* '''Boundary conditions at the cylinder''': At the rigid cylinder a clamped support is realized and all degrees of freedom are equal to zero.


* '''Boundary conditions at the extremity''': On the downstream trailing-edge side, the rubber plate is free to move and all nodes have the full set of six degrees of freedom.
* '''Boundary conditions at the trailing edge''': On the downstream trailing-edge side, the rubber plate is free to move and all nodes have the full set of six degrees of freedom.


* '''Boundary conditions at the lateral sides''': The edges which are aligned to the main flow direction need different boundary condition modeling, depending on whether the subset or the full case is computed as explained in details in Section [[UFR_2-13_Description#Numerical CFD Setup|Numerical CFD Setup]].
* '''Boundary conditions at the lateral sides''': The edges which are aligned to the main flow direction need different boundary condition modeling, depending on whether the subset or the full case is computed as explained in details in Section [[UFR_2-13_Test Case#Numerical CSD Setup|Numerical CSD Setup]].


=== FSI ===
=== FSI ===
Line 73: Line 83:
* '''FSI subiterations''': When the FSI phenomenon is fully developed, 5 FSI subiterations are sufficient to reach a FSI convergence criterion set to <math>\varepsilon_\text{FSI} = 10^{-4}</math> for the <math>\text{L}_2</math> norm of the displacement differences.
* '''FSI subiterations''': When the FSI phenomenon is fully developed, 5 FSI subiterations are sufficient to reach a FSI convergence criterion set to <math>\varepsilon_\text{FSI} = 10^{-4}</math> for the <math>\text{L}_2</math> norm of the displacement differences.


* '''Unterrelaxation''': To stabilize and speed up the FSI convergence an static unterrelaxation on the displacement is used. A constant underrelaxation factor of <math>\omega = 0.5</math> is considered for the displacements. The loads are transferred without underrelaxation.
* '''Unterrelaxation''': To stabilize and speed up the FSI convergence a static unterrelaxation on the displacement is used. A constant underrelaxation factor of <math>\omega = 0.5</math> is considered for the displacements. The loads are transferred without underrelaxation.


== Physical Modeling ==
== Physical Modeling ==
Line 87: Line 97:
* '''St. Venant-Kirchhoff material model''': Although the rubber material used for the test case shows a strong non-linear elastic behavior for large strains, the application of a linear elastic constitutive law is favored, to enable the reproduction of this FSI benchmark by a variety of different computational analysis codes without the need of complex material laws. This assumption can be justified by the observation that in the FSI test case, a formulation for large deformations but small strains is applicable. Hence, the identification of the material parameters is done on the basis of the moderate strain expected and the St. Venant-Kirchhoff constitutive law is chosen as the simplest hyper-elastic material model.
* '''St. Venant-Kirchhoff material model''': Although the rubber material used for the test case shows a strong non-linear elastic behavior for large strains, the application of a linear elastic constitutive law is favored, to enable the reproduction of this FSI benchmark by a variety of different computational analysis codes without the need of complex material laws. This assumption can be justified by the observation that in the FSI test case, a formulation for large deformations but small strains is applicable. Hence, the identification of the material parameters is done on the basis of the moderate strain expected and the St. Venant-Kirchhoff constitutive law is chosen as the simplest hyper-elastic material model.


* '''Rayleigh damping''': Due to the usual dynamic behavior of rubber, a certain level of damping has to be expected. To represent this adequately in the numerical simulation, various approaches are possible. However, damping in a vibrating structure is a complex phenomenon with various sources (Petersen, 2000). The goal within this benchmark description is to provide a simple modeling for the damping effects to enable the computation with standard finite-element codes without adapting them. Moreover, based on the experimental observations it can be observed, that within the proposed FSI benchmark only the lowest eigenmodes (nearly exclusively the first bending mode) of the structure are excited. A proper choice for the damping model is therefore the Rayleigh damping. More details can be found in De Nayer et al., 2013.
* '''Rayleigh damping''': Due to the usual dynamic behavior of rubber, a certain level of damping has to be expected. To represent this adequately in the numerical simulation, various approaches are possible. However, damping in a vibrating structure is a complex phenomenon with various sources (Petersen, 2000). The goal within this benchmark description is to provide a simple modeling for the damping effects to enable the computation with standard finite-element codes without adapting them. Moreover, based on the experimental observations it can be observed, that within the proposed FSI benchmark only the lowest eigenmodes (nearly exclusively the first bending mode) of the structure are excited. A proper choice for the damping model is therefore the Rayleigh damping. More details can be found in De Nayer et al., (2014).


=== FSI ===
=== FSI ===


* '''Partitioned approach with strong implicit coupling''': To preserve the advantages of the highly adapted CSD and CFD codes and to realize an effective coupling algorithm, a partitioned but nevertheless strong coupling approach is chosen. For a flexible structure in water, the added-mass effect by the surrounding fluid plays a dominant role. In this situation a strong coupling scheme taking the tight interaction between the fluid and the structure into account, is indispensable. In the coupling scheme developed in Breuer et al., 2012 this issue is taken into account by a FSI-subiteration loop which avoids instabilities due to the added-mass effect known from loose coupling schemes and maintains the explicit character of the time-stepping scheme beneficial for LES. For more details about this semi-implicit coupling scheme, we refer to Breuer et al., 2012.
* '''Partitioned approach with strong implicit coupling''': To preserve the advantages of the highly adapted CSD and CFD codes and to realize an effective coupling algorithm, a partitioned but nevertheless strong coupling approach is chosen. For a flexible structure in water, the added-mass effect by the surrounding fluid plays a dominant role. In this situation a strong coupling scheme taking the tight interaction between the fluid and the structure into account, is indispensable. In the coupling scheme developed in Breuer et al. (2012) this issue is taken into account by a FSI-subiteration loop which avoids instabilities due to the added-mass effect known from loose coupling schemes and maintains the explicit character of the time-stepping scheme beneficial for LES. For more details about this semi-implicit coupling scheme, we refer to Breuer et al. (2012).
 


== Application Uncertainties ==
== Application Uncertainties ==
Line 104: Line 115:


* '''Phase-averaging method''': To reduce statistical errors due to insufficient sampling to a reasonable minimum, the flow field was averaged in spanwise direction and for each phase over 27 cycles. Nevertheless, the results are not completely free of uncertainties arising from the averaging process.
* '''Phase-averaging method''': To reduce statistical errors due to insufficient sampling to a reasonable minimum, the flow field was averaged in spanwise direction and for each phase over 27 cycles. Nevertheless, the results are not completely free of uncertainties arising from the averaging process.


== Recommendations for Future Work ==
== Recommendations for Future Work ==
Line 109: Line 121:
* The numerical computations were conducted based on wall-resolved LES. It implies very fine meshes and also large CPU-time consumption. Wall functions should be tested to reduce this effort. Corresponding studies are in progress.
* The numerical computations were conducted based on wall-resolved LES. It implies very fine meshes and also large CPU-time consumption. Wall functions should be tested to reduce this effort. Corresponding studies are in progress.


* The described test case FSI-PfS-1a is a part of a series of reference test cases designed to improve numerical FSI codes. A second test case FSI-PfS-2a is described in Kalmbach and Breuer (2013). The geometry is similar to the first one: A fixed rigid cylinder with a plate clamped behind it. However, this time a rear mass is added at the extremity of the flexible structure and the material (para-rubber) is less stiff. The flexible structure deforms in the second swiveling mode and the structure deflections are completely two-dimensional and larger.
* The described test case FSI-PfS-1a is a part of a series of reference test cases designed to improve numerical FSI codes. A second test case FSI-PfS-2a is described in Kalmbach and Breuer (2013). The geometry is similar to the first one: A fixed rigid cylinder with a plate clamped behind it. However, this time a rear mass is added at the trailing edge of the flexible structure and the material (para-rubber) is less stiff. The flexible structure deforms in the second swiveling mode and the structure deflections are completely two-dimensional and larger.
<br/>
 
== Acknowledgments ==
 
The work reported here was financially supported by the Deutsche
Forschungsgemeinschaft under the contract numbers BR 1847/12-1
(Breuer, HSU Hamburg) and BL 306/26-1 (Bletzinger & Wüchner,
TU Munich). The large computations were carried out on the German
Federal Top-Level Supercomputer SuperMUC at LRZ Munich under the
contract number pr47me. Special thanks goes also to H. Lienhart
(LSTM Erlangen) for the construction of the water channel and many
helpful advices regarding the experimental setup.
<br/>
<br/>



Latest revision as of 12:11, 12 February 2017

Fluid-structure interaction in turbulent flow past cylinder/plate configuration I (First swiveling mode)

Front Page

Description

Test Case Studies

Evaluation

Best Practice Advice

References

Flows Around Bodies

Underlying Flow Regime 2-13

Best Practice Advice

Key Physics

FSI-PfS-1a consists of a flexible thin structure with a distinct thickness clamped behind a fixed rigid non-rotating cylinder installed in a water channel.

At an inflow velocity of m/s the displacements are quasi two-dimensional, symmetrical, reasonably large and well reproducible. The rubber plate deforms in the first swiveling mode. This FSI phenomenon is dominated by an instability-induced excitation (IIE) (Naudascher and Rockwell, 1994). IIE is provoked by flow instability which gives rise to flow fluctuations if a specific flow velocity is reached. These fluctuations and the resulting forces become well correlated and their frequency is close to a natural frequency of the flexible structure ("lock-in" phenomenon).

Based on the inflow velocity chosen ( m/s) and the cylinder diameter the Reynolds number of the experiment is equal to . Regarding the flow around the front cylinder, at this inflow velocity the flow is in the sub-critical regime. That means the boundary layers are still laminar, but transition to turbulence takes place in the free shear layers evolving from the separated boundary layers behind the apex of the cylinder. Transition to turbulence means that from that point onwards the flow is three-dimensional, chaotic and consists of a variety of different length and time scales. The rubber plate acts like a splitter plate behind the cylinder. However, for the length of the flexible splitter plate considered in the present study and the Reynolds number investigated, vortex shedding past the cylinder is not suppressed. Thus the low-frequency components of the turbulent flow dominate the coupled FSI problem, whereas the high-frequency contributions are visible in the fluid forces but are filtered out by the flexible structure. That is the reason why the signals for the deflections show the quasi-periodic signals without high-frequency fluctuations.


Numerical Modeling

CFD

  • Discretization accuracy: In order to perform LES predictions it is required that spatial and temporal discretization are both at least of second-order accuracy. It is also important that the numerical schemes applied possesses low numerical diffusion (and dispersion) properties in order to resolve all the scales and not to dampen them out. A predictor-corrector scheme (projection method) of second-order accuracy forms the kernel of the fluid solver. In the predictor step an explicit Runge-Kutta scheme advances the momentum equation in time. This explicit method is chosen because of its accuracy, speed and low memory consumption. The discretization in space is done with second order central discretization scheme without any flux blending.
  • Grid resolution: The second critical issue to perform LES is the grid resolution. The mesh near the wall, in the free-shear layers and also in the interior flow domain has to be fine enough. For wall-resolved LES the recommendations given by Piomelli and Chasnov (1996) should be followed or outperformed, e.g., . In the present investigation two different block-structured grids either for the subset and for the full case are used. In the first case the entire grid consists of about 13.5 million control volumes (CVs). For the full geometry the grid possesses about 22.5 million CVs. The first cell center is positioned at a distance of z/D=1.7 x 10. For both setups it was found to be sufficient to resolve the flow accurately at walls as well as in the free shear layers. Similar to the classical flow around a cylinder also in the present configuration it is important to resolve the region close to the separation point and the evolving shear layer region adequately.
  • Grid quality: The third point is the quality of the grid. Smoothness and orthogonality is a very important issue for LES computations. In order to capture separations and reattachments at the cylinder and on the plate reliably, the orthogonality of the curvilinear grid in the vicinity of the walls has to be high. For deforming grids such as in the present FSI case, it is furthermore crucial to keep a high quality grid after strong grid movements and deformations.
  • Inlet boundary condition: At the inlet a constant streamwise velocity is set as inflow condition without adding any perturbations. The choice of zero turbulence level is based on the consideration that ,in general, small perturbations imposed at the inlet will anyway not reach the cylinder due to the coarseness of the grid at the outer boundaries. Therefore, all inflow fluctuations will be highly damped. However, since the flow is assumed to be sub-critical and the inflow turbulence level measured in the experimental setup found to be rather small, the neglect of inflow perturbations is of no relevance.
  • Outlet boundary condition: A convective outflow boundary condition is favored allowing vortices to leave the integration domain without significant disturbances (Breuer, 2002). The convection velocity is set to .
  • Boundary conditions at the lateral sides: In the subset case a reasonable approximation already applied in Breuer et al. (2012) is to use periodic boundary conditions in spanwise direction for both the fluid and the structure. For LES predictions periodic boundary conditions represent an often used measure in order to avoid the formulation of appropriate inflow and outflow boundary conditions. The approximation is valid as long as the turbulent flow is homogeneous in the specific direction and the width of the domain is sufficiently large. The latter can be proven by predicting two-point correlations, which have to drop towards zero within the half-width of the domain. The impact of periodic boundary conditions on the CSD predictions are discussed below. For the full case periodic boundary conditions can no longer be used. Instead, the lateral boundaries are assumed as slip walls (similar to the upper and lower walls) since the full resolution of the boundary layers would be again too costly. Furthermore, the assumption of the slip wall is consistent with the disregard of the small gap between the flexible structure and the side walls.

CSD

  • Grid resolution: In the present investigation shell elements were used. A grid study on a simple structure case has shown that a mesh with shell elements for the subset case and with shell elements for the full case was sufficient.
  • Non-linear deformation: In the present test case the deformations of the flexible structure are moderate. However, in the realized computations possible geometrical non-linearities are taken into account with the CSD solver Carat++.
  • Time discretization: In the present study the standard Newmark algorithm was sufficient.
  • Boundary conditions at the cylinder: At the rigid cylinder a clamped support is realized and all degrees of freedom are equal to zero.
  • Boundary conditions at the trailing edge: On the downstream trailing-edge side, the rubber plate is free to move and all nodes have the full set of six degrees of freedom.
  • Boundary conditions at the lateral sides: The edges which are aligned to the main flow direction need different boundary condition modeling, depending on whether the subset or the full case is computed as explained in details in Section Numerical CSD Setup.

FSI

  • FSI subiterations: When the FSI phenomenon is fully developed, 5 FSI subiterations are sufficient to reach a FSI convergence criterion set to for the norm of the displacement differences.
  • Unterrelaxation: To stabilize and speed up the FSI convergence a static unterrelaxation on the displacement is used. A constant underrelaxation factor of is considered for the displacements. The loads are transferred without underrelaxation.

Physical Modeling

CFD

  • Wall-resolved LES: As mentioned above the flow in the present test case is in the sub-critical regime. Since in LES a large number of scales are resolved by the numerical method, this methodology is well suited. The near-wall regions are resolved too in order to obtain a reference LES solution. Later, wall functions can be used and compared.

CSD

  • Shell: The flexible structure of the test case is a simple rubber plate. It can be modelized with different FEM elements (plate, shell, 3D-rigid elements...). In the present study shell elements were used because we would like to carry out more complex test cases with exactly the same software environment in the future and hence, will also deal with curved surfaces.
  • St. Venant-Kirchhoff material model: Although the rubber material used for the test case shows a strong non-linear elastic behavior for large strains, the application of a linear elastic constitutive law is favored, to enable the reproduction of this FSI benchmark by a variety of different computational analysis codes without the need of complex material laws. This assumption can be justified by the observation that in the FSI test case, a formulation for large deformations but small strains is applicable. Hence, the identification of the material parameters is done on the basis of the moderate strain expected and the St. Venant-Kirchhoff constitutive law is chosen as the simplest hyper-elastic material model.
  • Rayleigh damping: Due to the usual dynamic behavior of rubber, a certain level of damping has to be expected. To represent this adequately in the numerical simulation, various approaches are possible. However, damping in a vibrating structure is a complex phenomenon with various sources (Petersen, 2000). The goal within this benchmark description is to provide a simple modeling for the damping effects to enable the computation with standard finite-element codes without adapting them. Moreover, based on the experimental observations it can be observed, that within the proposed FSI benchmark only the lowest eigenmodes (nearly exclusively the first bending mode) of the structure are excited. A proper choice for the damping model is therefore the Rayleigh damping. More details can be found in De Nayer et al., (2014).

FSI

  • Partitioned approach with strong implicit coupling: To preserve the advantages of the highly adapted CSD and CFD codes and to realize an effective coupling algorithm, a partitioned but nevertheless strong coupling approach is chosen. For a flexible structure in water, the added-mass effect by the surrounding fluid plays a dominant role. In this situation a strong coupling scheme taking the tight interaction between the fluid and the structure into account, is indispensable. In the coupling scheme developed in Breuer et al. (2012) this issue is taken into account by a FSI-subiteration loop which avoids instabilities due to the added-mass effect known from loose coupling schemes and maintains the explicit character of the time-stepping scheme beneficial for LES. For more details about this semi-implicit coupling scheme, we refer to Breuer et al. (2012).


Application Uncertainties

Application uncertainties can arise due to:

  • CFD boundary conditions in spanwise direction: The CFD boundary conditions at the lateral sides used in the full case setup are slip walls. In the reality there are of course boundary layers here which are not resolved. The CFD boundary conditions at the lateral sides used in the subset case setup are periodic. It has been shown that the model is a good compromise between low CPU consumtion and good physical representation. Nevertheless, it still induces a certain level of uncertainty.
  • CSD boundary conditions in spanwise direction: The CSD boundary conditions used, particularly that the nodes have to stay in same z-plane, are not optimal. Because of these the material is numerically more stiff. These boundary conditions provoke uncertainties.
  • Top and bottom slip wall boundary conditions: In the water channel the top and bottom sides are walls. In the simulations slip walls are used to reduce CPU-time consumption. However, this is an approximation which can lead to uncertainties.
  • Phase-averaging method: To reduce statistical errors due to insufficient sampling to a reasonable minimum, the flow field was averaged in spanwise direction and for each phase over 27 cycles. Nevertheless, the results are not completely free of uncertainties arising from the averaging process.


Recommendations for Future Work

  • The numerical computations were conducted based on wall-resolved LES. It implies very fine meshes and also large CPU-time consumption. Wall functions should be tested to reduce this effort. Corresponding studies are in progress.
  • The described test case FSI-PfS-1a is a part of a series of reference test cases designed to improve numerical FSI codes. A second test case FSI-PfS-2a is described in Kalmbach and Breuer (2013). The geometry is similar to the first one: A fixed rigid cylinder with a plate clamped behind it. However, this time a rear mass is added at the trailing edge of the flexible structure and the material (para-rubber) is less stiff. The flexible structure deforms in the second swiveling mode and the structure deflections are completely two-dimensional and larger.


Acknowledgments

The work reported here was financially supported by the Deutsche Forschungsgemeinschaft under the contract numbers BR 1847/12-1 (Breuer, HSU Hamburg) and BL 306/26-1 (Bletzinger & Wüchner, TU Munich). The large computations were carried out on the German Federal Top-Level Supercomputer SuperMUC at LRZ Munich under the contract number pr47me. Special thanks goes also to H. Lienhart (LSTM Erlangen) for the construction of the water channel and many helpful advices regarding the experimental setup.



Contributed by: G. De Nayer, A. Kalmbach, M. Breuer — Helmut-Schmidt Universität Hamburg (with support by S. Sicklinger and R. Wüchner from Technische Universität München)


Front Page

Description

Test Case Studies

Evaluation

Best Practice Advice

References


© copyright ERCOFTAC 2024