EXP 1-4 Description: Difference between revisions

From KBwiki
Jump to navigation Jump to search
(New article page for EXP_1-4_Description)
 
Line 7: Line 7:
__NOTOC__
__NOTOC__
= Description of Study Test Case =
= Description of Study Test Case =
<pre style="color: red">
This section should:
This section should:
* Convey the general set-up of the test case configuration (e.g. airflow over a bump on the floor of a wind tunnel)
* Convey the general set-up of the test case configuration (e.g. airflow over a bump on the floor of a wind tunnel)
Line 13: Line 14:
* give the principal quantities of interest that were measured - these should include global parameters but also mean-flow and turbulence parameters.
* give the principal quantities of interest that were measured - these should include global parameters but also mean-flow and turbulence parameters.


The description can be kept fairly short if reference can be made to a publication or a link to a data base where details are given. For other cases a more detailed, self-contained description should be provided.
</pre>


The description can be kept fairly short if reference can be made to a publication or a link to a data base where details are given. For other cases a more detailed, self-contained description should be provided.
<br/>
<br/>
----
----

Revision as of 08:26, 2 June 2023

Axisymmetric drop impact dynamics on a wall film of the same liquid

Front Page

Introduction

Review of experimental studies

Description

Experimental Set Up

Measurement Quantities and Techniques

Data Quality and Accuracy

Measurement Data and Results

Description of Study Test Case

This section should:
* Convey the general set-up of the test case configuration (e.g. airflow over a bump on the floor of a wind tunnel)
* Describe the geometry, illustrated by a sketch
* Specify the flow parameters which define the flow regime (e.g. Reynolds number, Rayleigh number, angle of incidence etc.)
* give the principal quantities of interest that were measured - these should include global parameters but also mean-flow and turbulence parameters.

The description can be kept fairly short if reference can be made to a publication or a link to a data base where details are given. For other cases a more detailed, self-contained description should be provided.




Contributed by: Bastian Stumpf, Milad Bagheri, Ilia V. Roisman, Cameron Tropea, Jeanette Hussong, Martin Wörner, Holger Marschall — Technical University of Darmstadt and Karlsruhe Institute of Technology

Front Page

Introduction

Review of experimental studies

Description

Experimental Set Up

Measurement Quantities and Techniques

Data Quality and Accuracy

Measurement Data and Results


© copyright ERCOFTAC 2024